作業用プラットフォーム付きセミトレーラーFAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
作業用プラットフォーム付きセミトレーラー
FAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
状態
中古
所在地
Essen 

機械に関するデータ
価格と所在地
- 販売者所在地:
- Heegstraße 6-8, 45356 Essen, ドイツ

電話する
技術詳細
- 最大積載重量:
- 44,420 kg(キログラム)
- 総重量:
- 53,000 kg(キログラム)
- アクスル構成:
- 3軸
- 初回登録:
- 04/2025
- 次回検査(TÜV):
- 04/2026
- 荷室長:
- 11,500 mm
- 全幅:
- 2,540 mm
- 装備:
- ABS(アンチロック・ブレーキ・システム)
オファーの詳細
- 広告ID:
- A21520922
- リファレンス番号:
- 37347
- 更新:
- 最終更新日:17.03.2026
説明
You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Iiedoyu Eu Ispfx Ag Iec
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
Iiedoyu Eu Ispfx Ag Iec
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
提供者
注意: 無料で登録するかログインして、すべての情報を取得してください。
登録日: 2003
73 オンライン広告
お問い合わせを送信
電話 & ファックス
+49 201 8... 広告
これらの広告もご興味があるかもしれません。
小型広告
Essen
9,183 km
作業用プラットフォーム付きセミトレーラー
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
小型広告
Lüdenscheid
9,176 km
ねじ製造機
HilgelandME2 VM
HilgelandME2 VM
小型広告
Urk
9,135 km
アトラスコプコ SF8 + FF オイルフリーエアコンプレッサー
Atlas CopcoSF8 + FF HC
Atlas CopcoSF8 + FF HC
小型広告
Gusselby
8,160 km
空気圧縮機
Atlas CopcoGA-37
Atlas CopcoGA-37
小型広告
Lüdenscheid
9,176 km
ねじ製造機
HilgelandCH1 KHA
HilgelandCH1 KHA
小型広告
ドイツ
9,058 km
コンプレッサー
Kaeser/Atlas CopcoCS75/AS44/BS60/GA45/TD51/TF171/TE76
Kaeser/Atlas CopcoCS75/AS44/BS60/GA45/TD51/TF171/TE76
小型広告
Hohenems
9,418 km
スクリューコンプレッサー GA30VSD+FF
Atlas CopcoGA30VSD+FF
Atlas CopcoGA30VSD+FF
小型広告
Hessisch Lichtenau
9,086 km
スクリューコンプレッサー コンプレッサー
KaeserASD 32 mit Wärmerückgewinnung
KaeserASD 32 mit Wärmerückgewinnung
小型広告
Calolziocorte
9,567 km
ネジ製造機
SACMASP17
SACMASP17
小型広告
Oelde
9,101 km
アトラスコプコ GA7-13 VSD
Atlas CopcoGA7- 13 VSD
Atlas CopcoGA7- 13 VSD
あなたの掲載は正常に削除されました
エラーが発生しました































































































