作業用プラットフォーム付きセミトレーラー

ES-GE 3-Achs-Sattelanhänger, Bordwände

You can find our complete stock of vehicles, including those available immediately and at short notice, on our website.

Excerpt from the equipment list. Full specifications available on request.

Chassis:
* Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads.

Coupling device:
* Fifth wheel plate with 2-inch kingpin

Underrun protection:
* According to EC regulations, bolted design

Side guard:
* According to EC regulations

Landing legs:
* 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel

Axles:
* 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm
* Air suspension operated via hand control valve with stop function

Steering:
* Last axle forcibly steered by linkage

Axle lift:
* First axle liftable, with fully automatic, load-dependent lift control

Brake system:
* Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle
Guodpfey Auhzsx Adiea
* Wabco brand

Tyres:
* Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer)

Mudguards:
* According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly

Load securing:
* 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t)
* 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t)
* Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame)

Stake pockets:
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading platform
* Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm
* Magazine for 20 plug-in stakes on the inside of the front wall

Front bulkhead:
* Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor, recessed into the outer frame

Side walls:
* 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes
* Side wall and stake magazine under the chassis
* Left and right insertion rails for side walls and stakes

Lighting system:
* According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights
* 1x 15-pin and 2x 7-pin plug sockets on front cross member

Equipment:
* Two wheel chocks with holders
* Warning signs according to ECE 70
* Work spotlight on lamp bracket (operated via reverse gear)
* Holder for rotating beacon at rear, incl. beacon
* 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm

Paintwork:
* Chassis and front bulkhead sandblasted, primed and coated in a single colour
* Chassis: hot-dip galvanised + RAL colour of choice
* Front bulkhead: RAL colour of choice
* Side walls: anodised aluminium
* Top stakes front bulkhead: hot-dip galvanised
* Hubs: KTL blac

この広告は自動翻訳されています。翻訳ミスがある可能性があります。