ZEISS Contura 7/10/6 RDS

ZEISS Contura 7/10/6 RDS

This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine.

Additional information
• Maximum workpiece size: approx. 1344 x 910 x 716 mm
• Maximum workpiece weight: 730 kg
• Table height: 850 mm
• Equipped with vibration damping system
• Sensor System:
• Articulating head: tilt ±180°, rotation increments 2.5°
• Scanning speed: up to 150 points/second
• Max. stylus length: 150 mm
• Max. stylus weight: 15 g
• Min. stylus tip diameter: 0.3 mm
• Accuracy (per ISO 10360 standards):
• Length measurement error (E₀): 1.7 + L/350 µm (at 18–22°C)
• Scanning error (THP): 2.7 µm
• Form measurement error (RONt): 1.7 µm
• Repeatability (R₀): 1.2 µm
• Controller: ZEISS C99L
• Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS
• Control mode: Motorized / CNC
• Interface: Ethernet, USB
• Performance:
• Drive system: Motorized CNC
• Travel speed (axes): 0–70 mm/s
Gsdpfx Asx D Ngfsb Usub
• Max. vector speed: 465 mm/s
• Max. acceleration: 1.85 m/s²
• Scanning speed: up to 125 mm/s
• Utilities:
• Power supply: 100–240V AC (±10%), 50–60 Hz
• Max. power consumption: 800 VA
• Typical power usage: 200 W
• Compressed air: 6–8 bar, pre-cleaned, dry (ISO 8573-1 Class 4)
• Air consumption: max. 120 Nl/min
• Environmental Conditions:
• Operating temperature: 18°C–22°C
• Relative humidity: 30–60% (non-condensing)
• Compliance & Certifications:
• Conforms to EC Machine Directive 2006/42/EC
• EMC Directive 2014/30/EU
• Quality management: ISO 9001:2008
• Environmental management: ISO 14001:2004
• Accredited ISO / IEC 17025:2005

Dimensions
Machine Depth 1975 mm