バキュームタンクローリー

MAN TGS 28.400 BL 6x2/4 Wiedemann Kombi Spüler

* Special equipment:
* Wiedemann & Reichhardt BASIC 1000 Type 11.5-360 Vario superstructure, suction and jetting vehicle, former municipal service vehicle.
* 3.0 m³ water / 8.0 m³ sludge, piston in front position
* Vessel tube, lid, and base made of stainless steel
* Stainless steel baffle plate mounted on sludge tank
* Combination unit with telescopic piston, suction hose reel, high-pressure hose reel mounted on a boom with electronic pressure and speed control and display readout
* ARCON radio remote control
* High-pressure pump: Uraca Type P3-45-60 (Plunger 60 mm, 346 l/min, 205 bar drive power 130 kW, drive speed 1500 rpm), 3,421 operating hours
* Vacuum pump: Wiedemann KW 2000 (2000 m³/h) with 4,395 operating hours (liquid ring pump)
* Liquid ring pump - power consumption 50 kW, speed 1300 rpm
* Liquid ring pump coupled with a pre-charge pump for temperature-dependent water circulation
* Suction and high-pressure boom (swivel reel with 2 high-pressure hose reels, which can be operated individually, simultaneously, or synchronously)
* Centrally mounted boom for optimal working range on both sides
* - hydraulically swivels approx. 180°
* - hydraulically telescopes approx. 1,200 mm
* Hydraulic cable winch mounted on boom, lifting capacity 250 kg
* Suction hose 25 m DN 125
* High-pressure hose reel 200 m DN 25
* Small high-pressure hose reel 80 m DN 13
* Length counter for high-pressure hose
* Manhole above tank DN 500
* Hydraulic tilting tank approx. 1 m for maintenance and repair work
* Hydraulic oil tank with 80 L capacity
* 5 sight glasses on tank lid
* Water filling on both sides with level indicator
* BEKA-MAX centralized lubrication system for superstructure only, pump type troni X1, runtime 1.5 min or 20 cycles, pause time 4h
* Accessories (various nozzles, suction hose DN 125, hose guides, spare parts (cardan shaft, valves, hoses))
* Handwash basin in the right front equipment cabinet, 20 L capacity, with swivel tap and fill unit
* Boxes right and left at the rear, approx. 50 L, for storage of return pulleys, nozzles, etc.
* Work floodlight (spotlight for shaft illumination), mounted on the boom, with 15 m cable and cable reel
* Various work spotlights mounted on both sides of the superstructure
* Rotating beacon on the boom and driver’s cab
* Holder for manhole hooks at the rear incl. 2 hooks
* 2 spring-tension cable reels
* Large equipment cabinets mounted to the right and left of the water tank (illuminated), approx. 50 cm deep, aluminum doors opening upwards, gas struts with top locking
* Wardrobe positioned over the high-pressure pump with lighting, ventilation slots, and water drain at the bottom
* Extendable vice with bracket to the right
* Rockinger SK 5 towing coupling
* Front axle load 9.5 t
* Raised exhaust pipe on right
Chodpfx Agjxvfxhskof
* Exterior mirrors electrically adjustable and heated
* Wide-angle mirror with electric maneuvering assistance
* Kerb mirror on the right, adjustable and heated
* Rear axle differential lock
* Air horns on driver's cab roof (2)
* Cab: with 2 rear wall windows, tinted
* Cab: with air suspension
* Flame start system
* Toggle brake (EVBec controlled)
* Middle seat
* PTO NMV 221, i=0.98 n=1470 rpm
* Cab socket 12V and 24V
* Control module for external data exchange
* Additional high/low beam and fog lamps with cornering light

* Further equipment:
* Reversing camera
* Turning camera
* Axle configuration: 6x2/4
* Steered trailing axle
* Wheelbase 3,600 mm + 1,350 mm
* Frame over...

この広告は自動翻訳されています。翻訳ミスがある可能性があります。