作業用プラットフォーム付きセミトレーラー

KÖGEL Multi Chassis, verstärkt, Bordwände

Excerpt - Equipment

Frame 10110.122 Regular ladder frame in lightweight steel construction with continuous cross members.
10115.010 With chassis frame pre-tension.
10300.108 Coupling plate approx. 8 mm thick, with a 2-inch drawbar eye according to DIN 74080 / ISO 337.

Chassis
I 17160.010 Axle lift mechanism on axle 1.
I 17165.103 Axle lift control fully automatic, load-dependent. Starting assistance: Activated by pressing the brake 3 times.
30% overload up to a speed of 25 km/h.
18330.700 Manufacturer of choice: Kögel - Three-axle unit, with disc brakes Ø 430 mm,
approx. 120 mm mounting depth. Air suspension with approx. 180 mm travel.

Vehicle tires
I 20540.037 Tires 6x 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L).

Chassis components
20110.010 Kingpin supports (manufacturer of choice: Kögel) mechanical with leveling foot, approx. 24 t lifting capacity.
Single-sided operation on the right side in the direction of travel.
I 21070.117 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for
three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of
the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of
quarter-circle fenders with splash flaps behind the axles.
21300.001 2 chock blocks with holder.
I 22070.008 Deletion of the standard side protection.
I 25010.170 Storage box for storing: 10 side panels, folding battens and rear door or
rear flap. Fully enclosed, protected against spray, simultaneously serves as side
protection.
I 25090.220 Ground clearance (front) approx. 220 mm.
I 25620.101 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm.
Installed at the rear, 1x on the left and 1x on the right.
I 26110.005 Deletion of access ladder.
Ijdpezkx Hhofx Aihjaw
27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58.
I 71800.020 1 pair of retractable warning boards for overwidth loads, retroreflective red/white, with
LED lighting, spiral cable and plug connection. Arrangement in the front and rear
vehicle area.

Brake/Air suspension system
32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection
ISO 7638, (without connection lines), parking brake as spring brake, external
pneumatic connections as well as external EBS diagnostics connection via ISO 7638
plug connection.
I 32125.010 EBS system (manufacturer of choice).
33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left behind the
axle unit in the direction of travel. Driving position is automatically adjusted.
34320.001 2 non-interchangeable coupling heads at the front, ISO 1728.
34410.010 Air reservoir for brake system and air reserve made of steel (EN 286-2).

Floor
40510.120 Plate floor approx. 30 mm thick.
I 40513.020 Floor sealed around the perimeter.
I 40542.023 Girder pockets for square tube inserts approx. 80 x 80 mm,
arrangement according to drawing J9: 8 pieces of girder pocket rails
(18 girder pockets per rail: 4 pieces each on the outside + 10 pieces in the middle).

Superstructure
I 46538.010 Meets superstructure strength according to EN 12642 XL (VDI 2700).
Tested for a payload of approx. 27,000 kg.

Front wall
I 40532.260 Storage for max. 20 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the
inside of the front wall.
I 41710.201 Front wall approx. 2,000 mm high with volume corner supports made of steel, with profi

この広告は自動翻訳されています。翻訳ミスがある可能性があります。