ローローダ

Goldhofer STZ-H6-57/80A Teleskop-Tieflader Waggontransport

Goldhofer STZ-H6-57/80A Extendable Low Loader for Railcar Transport

Approval Technical Data 1
Speed: 80km/h 65km/h
Fifth-Wheel Load: 23,000kg 26,000kg
Rear Axle Load: 10,000kg 11,000kg
Total Weight: 83,000kg 92,000kg
Payload: 52,500kg 61,500kg
Unladen Weight (without accessories): 30,500kg
Gooseneck:
Length: 4,000mm
Width: 2,480mm
Construction Height: 235mm
Fifth-Wheel Height: 1,350mm
Front Underride Protection: 1,420mm
Rear Underride Protection: 2,700mm
King Pin: 3.5 inch
Taper: Beveled 10 degrees
Front Corners: Beveled 45 degrees
Flooring: 50mm spruce
Landing Legs: mechanical
Width with sideboards: 2,550mm

Hydraulic STZ gooseneck with externally mounted beams, hydraulically raisable and lowerable,
with mechanical drop-leg supports and hydraulic support cylinders.
Hydromechanical forced steering (2-circuit steering system) in low-profile design (construction height 235mm) with adjustable guide elements and THP steering cylinders.
Loading Platform:
Type: Flatbed
Adjustable Height: No
Length: 13,000mm
Width: 3,000mm
Flooring: Steel/spruce 50mm
Wheel Wells: No
Wide Extensions: No
Extendable: Single-stage telescopic
First section length: 10,000mm
Loading heights (loaded):
Loading height 1: 815mm

Telescopic loading platform, designed as a combination of outer and inner tube construction, with a fixed 1,070mm long front platform section.

Integrated pin-eye coupling in the fixed platform section for connecting vessel bridge extension beams. The welded angle-section rails serve as a running track for rails with gauges of 1,000mm (rail distance 1,015mm) and 1,435mm (rail distance 1,450mm).
Locking of the extension stages by spring-loaded cylinders and conical bushings.
Platform height on the center tube (outer tube): approx. 815mm (+/- 130mm)
Platform height on the embedded rail elements: approx. 790mm (+/- 130mm)

Rear Undercarriage:
Chassis type: Standard
Loaded height: 815mm
Width: 3,000mm
Wheelbase: 1,360mm
Flooring: Steel plate
Wide extensions: No
Wheel wells: No
Excavator trough: No

Axles:
Number of axles: 6
Lift axle: see accessories
Axle type: Offset stub axles
Axle leveling: hydraulic
Axle manufacturer: BPW/Eco
Operating modes: 1
Axle lift (1) +/-: 130/130mm
Axle lift (2) +/-: 0/0mm
Raise/lower valve: Yes
1st axle pneumatically liftable with lift airbag

Steering:
Number of steered axles: 6
Steered axle arrangement: all steered
Max. steering angle: 45°
Steering type: Hydraulic, 2-circuit system

Tyres:
Size: 235/75 R 17.5 143/141 J
Type: twin wheels
Rim type: disc
Rim centering: hub-centered

Braking system code:
According to EU standard: Yes
AGS: Yes
ALB: Yes
ABS: Yes
With ABS delete: No
Parking brake: Spring-actuated
EBS: No
ECAS: No
Note: Brake calculation no.: GH 4324S
Podpfxoyfvf Ss Abksgg

Chassis remarks:
Steering designed for extended condition with greater steering angle for the front axles
Open wheel cutouts above the wheels with narrow transverse beams in between (ALU covers see below accessories)
Control elements protected, located on the left in the direction of travel...

この広告は自動翻訳されています。翻訳ミスがある可能性があります。