平台&防水シート付きトレーラーFLIEGL
SDS 390 Gardine Standard Ultralight Coil
平台&防水シート付きトレーラー
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW 固定価格 消費税別
€25,990
製造年
2021
状態
中古
所在地
Triptis 

写真は示しています
地図を表示
機械に関するデータ
価格と所在地
EXW 固定価格 消費税別
€25,990
- 所在地:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

電話する
技術詳細
- 空車重量:
- 5,800 kg(キログラム)
- 最大積載重量:
- 29,200 kg(キログラム)
- 総重量:
- 35,000 kg(キログラム)
- アクスル構成:
- 3軸
- 初回登録:
- 12/2021
- 荷室長:
- 13,650 mm
- 荷室幅:
- 2,480 mm
- 荷室高:
- 2,790 mm
- サスペンション:
- 空気
- タイヤサイズ:
- 385/65 R22.5"
- 色:
- シルバー
オファーの詳細
- 広告ID:
- A19083991
- リファレンス番号:
- 59340
- 更新:
- 最終更新日:06.05.2025
説明
The images are archived; the vehicle may still be in use!
Hfsdpfxowhp A Do Adgjr
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
Hfsdpfxowhp A Do Adgjr
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
提供者
お問い合わせを送信
電話 & ファックス
+49 36482... 広告
あなたの掲載は正常に削除されました
エラーが発生しました








