低床セミトレーラー

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.

Excerpt from equipment features. Complete specifications available on request.

Gooseneck:
* Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

One-piece steel ramps:
* One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramps with hydraulic lifting mechanism, hydraulically adjustable
* Maximum load per pair: 40,000 kg
In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length

Loading area:
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area
* Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each
* Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H))
* 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN)
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN)
Bodpfxextc Ubj Agkjdk
* Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN)

Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t)

Axles:
* BPW axles and suspension, 2 rigid axles, 1 trailing steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, activated via reverse gear and manually
* Air suspension with lift/lowering valve
* Axle tool kit

Tyres:
* Tyres 235/75 R 17.5 3PMSF – brand at our discretion
* TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data

Braking system:
* WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit

Steel construction:
* Steel structure made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)

Electrical system:
* Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting
* ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets
* Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Paintwork:
* Complete steel construction automatically shot-blasted with turbine blasting machine after welding
* Second blasting treatment with corundum for optimum coating adhesion
* Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL
* Rims in silver
* Rear section metallized and painted in RAL 9010 (Pure White)
* Paint system tested in salt spray mist test according to ISO 9227-NSS
* Cavity sealing with special wax

Including the following extras:
* 2-inch kingpin
* One

この広告は自動翻訳されています。翻訳ミスがある可能性があります。