特殊トルク材質試験機

ZwickRoell BT2-FZ1.0TN.D16.001 1 kN / 2 Nm

Material Testing Machine / Universal Testing Machine

Type: BT2-FZ1.0TN.D16.001
Base System: zwickiLine Z1.0 TN
Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm

Technical Data:

Testing Range:
Maximum axial testing force Fmax: 1 kN
Configured maximum testing torque Mmax: 2 Nm
Types of tests: Tensile, compressive, and torsional
Axial drive / crosshead:
Crosshead speed: 0.0005 to 2,000 mm/min
Max. return speed: 2,000 mm/min
Speed deviation: max. 0.05 %
Path resolution: 0.0554 µm
Positioning repeatability: ±2 µm
Controller: adaptive
Control cycle: 1,000 Hz
Testing chamber:
Testing chamber height with crosshead angled upwards: 235 to 1,065 mm
Testing chamber height with crosshead angled downwards: 90 to 920 mm
Testing chamber depth: 105 mm
Dimensions of base machine:
Height of load frame without head crosshead: approx. 1,289 mm
Width with machine electronics: approx. 411 mm
Depth with machine electronics: approx. 622 mm
Weight of base machine: approx. 76 kg
Type: Torsional drive
Item No.: 1023835
Maximum drive torque: 20 Nm
Rotational speed: 0.01 to 20 rpm
Accuracy of set drive speed: 0.05 %
Control cycle: 1,000 Hz
Axially permissible testing force on the torsional drive: ±5 kN
Power connection torsional drive: 230 V / 1 Ph / N / PE
Mains frequency: 50 / 60 Hz
Dkodpfx Acjzwvtxj Tet
Power consumption under full load: approx. 2.3 kVA
Torque sensor:
Item No.: 069536
Rated torque: 2 Nm
Limit torque: 150 % of the rated torque
Accuracy class 1 from: 0.008 Nm
Accuracy class 0.5 from: 0.02 Nm
Protection class: IP65
Force sensor:
Type: Zwick / Roell Xforce HP
Item No.: 069531
Rated force: 1 kN / 225 lbf
Max. operating force: 150 % of Fnom
Accuracy class 1 from: 2 N
Accuracy class 0.5 from: 10 N
Protection class: IP54
Measurement and control electronics:
Zwick / Roell testControl II
Measurement value acquisition rate: 400 kHz
Measurement value transfer to PC: 500 Hz
Optionally expandable to: 2,000 Hz
Control cycle: 1,000 Hz
PC interface: Ethernet
Measurement signal runtime correction: for all channels
Protection class electronics: IP32
Safety device:
Swiveling front safety device
Electrically monitored interlock
Protective screen made of transparent polycarbonate
Material thickness of protective screen: 6 mm
Dimensions of safety device:
Height: approx. 1,237 mm
Width: approx. 435 mm
Depth: approx. 238 mm
Testing tools / accessories:
Pneumatic universal holder for pen systems
Max. clamping force: 200 N
Compressed air supply: 8 bar, filtered and unlubricated
Pneumatic 3-finger gripper
Max. clamping force: 50 N
Compressed air supply: 8 bar, filtered and unlubricated
Alignment unit
Torque sensor 2 Nm
Xforce HP force sensor 1 kN
Torsional drive
Front safety device
Zwick/Roell machine electronics
Software:
Zwick / Roell testXpert III testing softwareVersion: 1.2
+
ALMEMO 2450 universal measuring device
Humidity/temperature sensor FHAD4641
+
Mettler Toledo precision balance
Type: Mettler WXSE
+
Visual recognition system color
Zwick Item No.: 3004644
Vision sensor: IV-G500CA
Evaluation unit: IV-G10
Installation distance: 20 to 500 mm
+
Auto Injector
Condition: used
Optical condition according to the pictures
Functionality according to the pictures

The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves.
Subject to changes, errors and prior sale.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。