マシニングセンター VISION III-TT-L

Reichenbacher VISION III-TT-L – 5-Achs, 3-Achs, MBG8

Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA

Equipment:

5-Axis Unit with Cardanically Mounted Spindle:
Max. speed: 24,000 rpm
Nominal speed: 10,000 rpm
Power in S1*: 15 kW
Max. power in S6: 20 kW
Torque in S1*: 14.5 Nm
Torque in S6: 19 Nm
Nominal voltage: 380 V
Nominal current: 37 A
Nominal frequency: 380 Hz
Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments
Clockwise/counterclockwise rotation selectable via program
Lrsdpfx Aoywzq Ssb Uji
Driven by frequency inverter
Maintenance-free
Water-cooled
Hybrid bearings
Automatic spindle stop in case of emergency stop
Orientated stop for thread cutting
Tool holder:
HSK-F63 hollow shaft taper according to DIN 69893-6
Max. tool length usable from spindle nose: 240 mm
Max. tool weight: 6 kg

3-Axis Unit with Vertically Mounted Spindle:
Max. speed: 24,000 rpm
Nominal speed: 10,000 rpm
Power in S1*: 15 kW
Max. power in S6: 20 kW
Torque in S1*: 14.5 Nm
Torque in S6: 19 Nm
Nominal voltage: 380 V
Nominal current: 37 A
Nominal frequency: 380 Hz
Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments
Clockwise/counterclockwise rotation selectable via program
Driven by frequency inverter
Maintenance-free
Water-cooled
Hybrid bearings
Automatic spindle stop in case of emergency stop
Orientated stop for thread cutting
Tool holder:
HSK-F63 hollow shaft taper according to DIN 69893-6
Max. tool length usable from spindle nose: 240 mm
Max. tool weight: 6 kg

8-Spindle Drilling Unit (1 unit):
L-Shape, Grotefeld
Drill spindles: individually selectable
Rotation direction: clockwise/counterclockwise
Pitch: 32 mm
Power: 2.5 kW
Speed: 5,000 rpm fixed
Z-axis stroke: +75 mm
Holder: D = 10 mm H7
Plunge stroke: 80 mm

Grooving Unit (5 units):
GROTEFELD Angle Saw Unit F100-S
The working/milling stroke is pneumatic.
Drive: three-phase motor with multi-ribbed belt
LEFT version
Drive rotation direction: clockwise/counterclockwise
Speed reduction: 1:2.86 – belt drive
Power: 2.20 kW – 220-240/380-415 V – 50 Hz
Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz
Spindle power: 2.2 kW
Feed: 150 mm
Tool holder: Ø30 x 1.5 mm – 5.0 mm
Tool holder rotation: opposite to drive rotation direction
Feed force: 2565 N

Underfloor Drilling Unit in Machine Bed (1 unit):
GROTEFELD Angle Milling Head G06-1.1-P
The working/drilling stroke is pneumatic.
Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz
Drive rotation direction: clockwise
Speed reduction: 1:1.55 gear drive
Drive speed: 2,800 – 5,600 rpm
Tool spindle speed: 4,340 – 8,680 rpm
Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°)
For ER25 collet DIN 6499-B Ø0.5–16 mm max.
Tool holder rotation direction: clockwise
Flange clamping piece: FK45
Feed slide: with pneumatic cylinder and double steel guideways
Feed: 80 mm

この広告は自動翻訳されています。翻訳ミスがある可能性があります。