幌付きオープンセミトレーラー

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition.

Permissible kingpin load: 12,000 kg
Technical possible kingpin load: approx. 12,000 kg
Permissible axle load: 24,000 kg (8,000 kg per axle)
Technical possible axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible total weight: 36,000 kg
Technical possible total weight: approx. 39,000 kg
Unladen weight, basic equipment: approx. 6,130 kg
Unladen weight, individual configuration: approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Internal loading length: approx. 13,620 mm
(G) Internal loading width: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
Tire size: 445/45R19.5
(H1) Loading height unladen, driving position level: approx. 1,020 mm
(H2) Loading height laden, driving position level: approx. 990 mm
(H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm
Ride height set to 265 mm.
(K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm]
(K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm]
(X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment
(X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment
Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting.

(T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm
(P) Construction height above king pin: approx. 90 mm
(S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!)
Braking system in accordance with ECE-R13
Electrical system in accordance with ECE-R48
Wabco brakes, air suspension
BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke.
6 x 445/45 R 19.5 tires
Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel
Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets
Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!)
Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only.
Hjdpoy Ifw Dsfx Amljl
"Daimler load securing DL 9.5" certificate

この広告は自動翻訳されています。翻訳ミスがある可能性があります。