コンテナシャーシセミトレーラー

Fliegl SDS 380 Vario Kipp 30/40

Custom-made transport solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Chassis, saddle, container
Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions
Front locking mechanism on the tipper ram mounting bracket with lateral locking
Tapered locking wedges, rear locking mechanism on a continuous pivot shaft with return spring
Without subframe for self-supporting containers
Container mounts:
Locking crossmember, 2-fold for locking 1 x 30 ft or 1 x 40 ft container.
Adjustment via central telescope as an interlocking central tube frame
with bolt lock. Optimal saddle load when transporting 30 ft and 40 ft containers.
24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation
2 support wedges with holder
Aluminum side impact protection
Galvanized steel underrun protection
Half-shell fenders
with anti-spray flaps according to EC
Hydraulics
100 low-pressure cylinder, max. 150 bar, with HDK screw connection, fixed part, NW 48 mm. (without hose connection)
Operation hydraulically via truck auxiliary drive, included.
Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/chassis laser-aligned, reduces tire wear and fuel consumption
Axle spacing offset mm (combined transport) up to 44 tons total weight
Air suspension
Braking system
170 2-line compressed air braking system
Color-coded line routing for easy service.
Spring-loaded parking brake
Tele Control
Dedpsi Riv Eefx Abweck
Axle load adjustment for easy telescoping
2 fail-safe coupling heads at the front, without connection cable
EBS, electronic braking system with EBS socket at the front, without connection cable
Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS!
with lifting and lowering valve
Vehicle - driving stability system
Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be prepared accordingly
Wheels and tires
385/65 R22.5, manufacturer at the manufacturer's choice
Steel rims, factory silver
Electrical system
24 volts, multi-chamber lights, yellow LED lighting on the side
2 white position lights at the front
2 white/red marker lights at the rear
2 x 7-pole fail-safe sockets at the front, without connection cable
2 additional LED work lights at the rear, switched via reversing light

Custom-made transport solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。