コンテナシャーシセミトレーラー

Fliegl SDS 380 Kippchassis für 1x 20

Customized Transport Solution
Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Semi-Trailer Container Chassis
Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions
Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return
Without subframe for self-supporting containers
Container mounts:
Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers)
24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation
Clear support foot corner dimension or clear rear swing radius approx. 1850 mm
2 wheel chocks with holders
Half-shell fenders
with anti-spray flaps per EC standards
Hydraulics
Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK
Screw coupling, fixed part, nominal diameter 48 mm.
(without hose connection)
Hydraulic operation via truck auxiliary power unit
Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut
Axles + Suspension
3 SAF disc brake axles with 430 mm disc diameter
Laser-measured axles/chassis to reduce tire wear and fuel consumption
Offset wheelbase mm (combined transport) up to 44to
Gross train weight
Air suspension.
Brake System
2-line compressed air brake system
Color-coded lines for easy servicing.
Spring-loaded parking brake
2 non-reversible coupling heads at the front, without connecting line
EBS, Electronic Brake System with EBS socket at the front, without connecting cable
Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS!
With lift & lower valve
Vehicle stability control system
Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no
calibrated scale)
Wheels and Tires
6 385/65 R22.5 (manufacturer’s choice)
6 steel rims, factory silver
Electrical System
24 volts, multi-chamber lights, yellow LED side lighting
2 white front position lights
2 white/red rear lane-keeping lights
2 x 7-pin reverse-proof sockets in front, without connecting cables
Country of Registration/License Plates
Germany
With DEKRA approval and inspection report (in accordance with §13 EG - FGV)
24/7 Service Hotline
Prepared for single-line license plate holder
Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear
Itodpfx Aji Ri Euog Ish
Paint finish
Frame: colour of choice
10-year warranty against rust-through
Support feet: Black coated

Note: Archive images!