ツヴィック・ロエル 10kN 引張・圧縮試験機 BT1-FB010TN.D30 testXpert 付属品一式付き

ZwickRoell Roell ProLine Z010 TN

Zwick/Roell

Zwick/Roell ProLine Universal Testing Machine
Z010 TN – 10 kN, Type: BT1-FB010TN.D30

For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN.
The machine comes from an industrial setting and has been professionally operated.

General Data:
Manufacturer: Zwick GmbH & Co. KG, Ulm
Rated force: 10 kN
Type of test: Tensile and compression test

Technical Performance Data:
Crosshead speed: 0.001 – 1,000 mm/min
Speed accuracy: 0.01% of Vnenn (nominal speed)
Displacement resolution: 0.038 µm
Positioning repeatability: < 2.0 µm
Maximum test frequency: 0.5 Hz
Lodpfxszizrks Amfsah
Data acquisition rate: 500 Hz
Data transfer to PC: 10–100 Hz
Force measurement according to ISO 7500-1

Dimensions & Weight:
Height with leveling elements: approx. 1,331 mm
Width with electronics: approx. 930 mm
Depth with electronics: approx. 437 mm
Working space width: 440 mm
Working space height (bottom): 1,050 mm
Weight with typical components: approx. 160 kg

Electrical Data:
Adjustable mains voltage: 100–250 V
Mains frequency: 50 / 60 Hz
Power consumption: 800 VA
Current consumption at 230 V: approx. 3.4 A
Fuse rating: ≤ 16 A
Connection: 1L / PE / N

Documented test and calibration records:
18.09.2017
Machine BT1-FB010TN.D30
testXpert II Version 3.2
tC-PC System
Temperature during testing: 23.3 °C

Displacement measurement system: Incremental encoder (rotary)
Force sensor installed
29.01.2014
Force sensor: Xforce HP
Module: DCSC
Calibration at Zwick Ulm

28.08.2013
Force sensor: Xforce P
Module: DCSC
Rotation before test series: 120°
testXpert control system

Documented service and calibration records are available.

Software & Control:
Software: testXpert® II
Documented version: V3.2
Installation documentation from version 2.2
Documentation status: March 2010
PC control: tC-PC
Interfaces: RS232 / Ethernet

Note: testXpert II is a professional industrial testing software.

Installed Modules & Components
DCSC measuring module
Force sensor Xforce P / Xforce HP
Incremental encoder (rotary displacement measurement system)
ISO 7500-1 compliant force measurement

Installed under the traverse

Important Note:
“The table shown in the photos is not part of the sale.”

Condition: used

Scope of delivery:
Material testing machine BT1-FB010TN.D30
PC with monitor
Force sensor
DCSC module
Specimens / Grips
Adapters and holders
Tools
Documentation folder with documents

Scope of delivery as shown in the pictures.

(Changes and errors in the technical data are subject to change!)

We will be happy to answer any further questions you may have by telephone.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。