Vötsch VT 7012 S2 Temperature Shock Test Chamber -80°C to +220°C, 125 Liter Climate Chamber

Vötsch Schocktestkammer

Vötsch

Temperature Shock Chamber / Shock Test Chamber

Vötsch VT 7012 S2 Temperature Shock Chamber
Two-chamber system for rapid temperature changes from -80 °C to +220 °C
Water-cooled version with a mobile cart and programmable controller

For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.

The system is suitable for temperature shock and temperature cycling tests,
environmental simulation, material testing, quality assurance,
electronics and component testing, as well as development, aging, and stress tests.

The test chamber operates with a hot and a cold chamber.
The test specimen is moved between the two temperature zones using a mobile cart.
The system has an observation window,
test chamber lighting, and a programmable controller.

Technical data:

Manufacturer: Vötsch Industrietechnik GmbH
Type: VT 7012 S2
Device type: Temperature shock chamber / Shock test chamber
Version: Two-chamber system / water-cooled

Temperature range, hot chamber: +50 °C to +220 °C
Temperature range, cold chamber: -80 °C to +70 °C
Temperature deviation (time): ±1.0 K
Temperature deviation (spatial): ±2.0 K

Heating rate, hot chamber: approx. 11.0 K/min
Cooling rate, cold chamber: approx. 3 K/min
Heating rate, cold chamber: approx. 2.0 K/min

Test chamber volume: approx. 125 liters
Test chamber dimensions: 470 × 410 × 650 mm (W × H × D)
Max. load capacity, mobile cart: 40 kg
Max. total load capacity, mobile cart: 20 kg
Pipe connection: Ø 67 mm

Refrigerant 1: R404A
Refrigerant quantity: 2.5 kg
Max. low pressure: 22.5 bar g
Max. high pressure: 25 bar g

Refrigerant 2: R23
Refrigerant quantity: 1.1 kg
Max. low pressure: 22.5 bar g
Max. high pressure: 25 bar g
Standby pressure: 13 bar g

Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz
Rated power: 10 kW
Rated current: 25 A
On-site fuse: 32 A slow-blow
Compressor power: 2 × 3 kW

Cooling water supply:
Inlet pressure: 3 to 6 bar
Differential pressure, inlet and outlet: ≥2.5 bar
Water connection: R 3/4" internal thread

Dimensions:
External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H)
Weight: approx. 1,000 kg

Equipment:

Two-chamber temperature shock system
Hot chamber
Cold chamber
Motor-driven mobile cart
Programmable controller
Manual operation
Automatic operation
Shock test operation
Observation window
Test chamber lighting
Pipe connection Ø 67 mm
Water-cooled refrigeration system
Signal light
Control terminal
Accessories as shown in the pictures

Application areas:

Temperature shock testing
Temperature cycling testing
Environmental simulation
Material testing
Electronics testing
Component testing
Assembly testing
Quality assurance
Research and development
Service life testing
Aging and stress tests

Condition:
Used
Optical condition as shown in the pictures

Scope of delivery:
1x Vötsch VT 7012 S2 Temperature Shock Chamber
Control terminal
Original operating manual
Accessories as shown in the pictures

Important note:
For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance:
1. Functional check and replacement of necessary components
2. If necessary, refill with legally compliant refrigerant
3. Leak test with certificate
4. Documented test run after successful inspection
Bodpfxoz Ehrgs Akcslp

The table or other items not explicitly mentioned in the photos are not part of the sale.

Shipping or forwarding possible.
Subject to changes, errors and prior sale.
We are happy to answer further questions by phone.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。