CNC旋削・フライス盤センター

Spinner TC30052SMCY

SPINNER TC300-52 SMCY – CNC turning center, manufactured in 2012
including SPINNER Servo-Load 80-1500 bar feeder

Availability: The machine is expected to be available in November/December 2026, once the new machine has been delivered.

The machine is currently in continuous production and operating at full capacity. It can be inspected at any time while powered on and in operation – you can see the machine working before you buy. It has been running continuously on a single shift.

Operating hours: The operating hours have not yet been recorded. They will be provided and published here.

General
- Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH, Sauerlach
- Type: TC30052SMCY | Machine no. AZ0145 | Manufactured in 2012
- Control system: Siemens Sinumerik 840D sl, ShopTurn
- Connection: 3/PE ~ 400 V, 50/60 Hz, I_B 34 A, I_N 35 A
- Weight approx. 3,700 kg | Footprint approx. 2,100 × 1,500 × 1,800 mm

Working area
- Swing diameter approx. 300 mm
- Turning diameter approx. 200–250 mm
- Turning length approx. 400–500 mm
- Travels X 180 / Z 450 / Y ±40 mm
- Rapid traverse X 15 m/min, Z 24 m/min
Bjdpfozx Subox Ah Soll

Main spindle
- Motor spindle with C-axis
- Bar capacity 52 mm
- 0–5,000 min⁻¹, approx. 15 kW, approx. 95 Nm
- Chuck 210 mm

Counter spindle
- With C-axis
- Up to 7,000 min⁻¹, approx. 6 / 7.8 kW, approx. 38 / 50 Nm
- Chuck 140 mm

Turret
- 12-position servo turret, VDI 25
- All 12 stations powered, up to 6,000 min⁻¹, approx. 3 / 4.6 kW

SPINNER Servo-Load 80-1500 bar feeder
- Original SPINNER, factory-matched to the machine
- Bar length up to 1,500 mm, diameter up to 52 mm (spindle bore)
- Servo-electric, with its own control panel

Scope of supply
- Counter spindle, C-axis, Y-axis, driven tools
- SPINNER Servo-Load 80-1500 bar feeder
- Chip conveyor, chip tray, coolant system
- Tool cabinet with tools and holders
- Complete documentation

In the next few days, pictures and a video of the tools, documentation, and entire scope of supply will be taken and uploaded here.

Note regarding technical data
The technical data mentioned above are currently provided for orientation purposes only. The data will be taken from the original documents of this machine and then uploaded here.

All information is provided to the best of our knowledge, but without guarantee. All technical data and equipment features must be checked on the machine or by means of the documentation before the purchase is finalized.

Terms and conditions
Sale of a used machine from ongoing production, as is, with no warranty of any kind. Price net ex works, plus VAT. Dismantling and transport can be arranged upon request.

If you have any questions or would like to arrange a viewing, please do not hesitate to contact me at any time.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。