マンドレル管曲げ機

Sommer Maschinenbau GmbH S60

Mandrel Bending Machine S6006
-----
For producing dimensionally accurate tube geometries with bending radii of up to 1.5xD
→ Maximum bending capacity tube 60.3 x 4 mm (400 N/mm²)
→ Maximum bending capacity tube 60.3 x 2.6 mm (stainless steel)
→ Total connected load 5 kW
→ Tube feed length 6 m

Robust and durable steel construction with a force-locked design—no torsion-prone structure such as a separated construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control system's touch display enables easy and intuitive programming and operation of the machine. After the tube is loaded, it is fixed by a chuck on the carriage. This ensures precise positioning of the tube, allowing the creation of dimensionally accurate geometries. Standard equipment also includes geometry verification before the bending process: If the bending process is started from the wrong position, the machine will not allow it. This prevents incorrect operation. Optional additional features offer more convenience and increase output and thus the efficiency of the system.

Data transfer from the optional TBS-3D tube calculation software (PC version) is done via USB stick or via FTP access from the computer to the machine control. USB or LAN connector (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format.

Standard equipment:
→ Electromechanical drive for bending axis 2.2 kW
→ Rotation speed 2.9 rpm (=17°/s)
→ Left-hand bending direction
Fodpfx Ajw Sr Ucsahopn
→ Bending angle resolution 0.1°
→ Max. bending radius 200 mm
→ Bending shaft diameter 50 mm
→ Electronic length measurement ±0.1 mm
→ Electronic torsion measurement ±0.1°
→ Manual stop system (length overtravel stops)
→ Manual indexing system (15° increments for torsion)
→ Three-jaw chuck to clamp the tube in the carriage
→ External control panel

PLC Control:
→ 10.1" touchscreen
→ ETH 10/100, X2X Link, USB
→ Foot switch operation
→ Data transmission via (W)LAN or USB
→ Material database
Unique graphical programming: Simple geometries can be calculated directly at the machine. The control system calculates the feed and bending angle directly after entering length and angle values.

Hydraulics:
→ Hydraulic power 3 kW
→ Hydraulic tube clamping with adjustable clamping pressure
→ Programmable early mandrel retraction

Options (available as additional equipment):
→ Variable bending speed via frequency inverter or servo motors
→ Automatic tool retraction (manual or controlled)
→ Pneumatic chuck
→ Automatic mandrel lubrication
→ Pneumatic stop system (length + torsion)
→ Mobile version (with castors)
→ Radius extension

Sample image shows a similar machine

この広告は自動翻訳されています。翻訳ミスがある可能性があります。