コイルライン

KOHLER KRE 30.400/9-2000.2H

Item No.: Lg 35626

Coil handling system KOHLER 30.400/9 - 2000.2H
Dksdpfx Aiozpbazs Net
used
Year of manufacture: 2003
Machine No.: 70330

Working direction: from left to right
Loading side: rear

Consisting of:

Double unwinding reel 2000.2H

Load capacity: max. 2,000 kg/side
Coil width: 85 to 400 mm (when using a pressure arm)
Spreading range: 360 – 420 mm
Outer diameter: max. 1,800 mm

Spreading: hydraulic/sliding wedge system
+ Automatic retension

Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding

Braking: spring-loaded/disc brake
Coil diameter-dependent control

Lateral displacement: motorized
Displacement distance: approx. 200 mm
Base frame: frame construction

Swiveling: motorized 180°, locking pneumatic, actuated wedge

Counter bearing: manually attachable with quick-release fastener, open construction
Coil loading: by means of rope or strap

Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days.

Counter bearing:
The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm.

Automatic brake control/coil diameter dependent
A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding.
Base frame with motorized lateral displacement of the reel

2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor.

Coil straightening machine 30.400/9

Passage width: max. 400 mm
Number of straightening rollers: 9 pcs.
Straightening roller diameter: 30 mm
Straightening roller material thickness: 0.4 – 3.0 mm

Roller stand adjustment: motorized (2-point)

The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out.

Measuring device: digital
Measuring display: metric
Setting accuracy: 0.01 mm
Straightening roller bearing: needle bearing
Bearing sealing: shaft seals
Straightening roller hardness: HRc 60
Straightening roller surface roughness: 0.001 mm and better
Straightening roller drive: individual drive
Gearbox: distribution gearbox
Lubrication: grease lubrication of the straightening roller bearing
Oil circulation lubrication of the cardan shafts
Drive: three-phase motor with frequency control
Speed: 0 - 40 m/min
Number of coil feed rollers: 2
Coil feed roller diameter: 120 mm
Coil feed roller adjustment: pneumatic
Drive coil feed: both rollers from the straightening machine gearbox
Surface coil feed rollers: like straightening rollers

この広告は自動翻訳されています。翻訳ミスがある可能性があります。