インデックス C200

Index C200

This 5-axis Index C200 was manufactured in 2023, offering advanced capabilities for horizontal turning. Ideal for precision and efficiency in metalworking, this machine represents a significant asset for enhancing production quality. Consider the opportunity to buy this Index C200 horizontal turning machine. Contact us for more information.

Additional equipment


• Software options: OPC UA for master computer connection (max. 200 variables). ChipMaster cycle for chip breakage control.

• Environmental data: Noise level: 73.8 dB(A)

Machine Benefits

Technical Machine Benefits


• Control system: based on sinumerik 840d solutionline (sl) with sinamics s120 drives. 18. 5" tft color display with pct-touch (ip65). Siemens operate user interface in german.

• Interfaces: 4x usb 2. 0 (2 on the control panel, 2 in the control panel). Network-capable for nc data transfer (logical drives).

• Safety: siemens safety-integrated (profisafe).

• Turret mechanics: hydraulic locking, ac motor with face gearing. Drive power per tool carrier: 10 kw (25 % ed), max. 8,000 rpm.

• Tool holder: cylindrical shank d25x48 (din69880) with w-slots for higher repeat accuracy. Driven tools possible in every station (only rotating in working position).

• Cooling unit: 13 kw for hydraulics, spindles and control cabinet. Connection for cooling water (20°c ±2°c, 30 l/min, glycol 25 %).

• Chip conveyor: hinged belt conveyor (made by knoll) with 180-liter container, discharge height 840 mm. Cooling lubricant system: 750-liter container, 8-bar/20-80-bar pumps.

• Bar loader interface: unimag4-compatible (external loaders require specific cover). Maximum bar length: 1,035 mm (short bar operation). Gantry pick-up device: pneumatic gripper (Ø 10-90 mm, max. 3. 5 kg). Conveyor belt with switch for finished parts/remaining parts.

Extra Information

Control Unit
Operating voltage: 400V
Control voltage: 24V DC
Frequency: 50Hz
Rated power: 54kW
Connected load: 65kVA
Rated current: 94A
Max. back-up fuse: 100A

Main Drive
Main spindle and counter-spindle
Spindle head mounting: OD 140mm, ID 85mm
Front bearing diameter: 110mm
Torque max. (100%/40%): 125/170 Nm
Clamping pressure min./max.: 8/80 bar
Piston area pressure: 57cm²
Piston area tension: 57cm²
Compressive force max.: 45600 N
Tensile force max.: 45600 N

C-axis:
Drive: Hollow shaft motor of the spindle; angle measuring system directly on the spindle
Position spread (VDI/DGQ 3441): Psmax = 0.01 degrees

Turret
Tool carrier 1
X-axis working path: 110mm
X-axis rapid traverse: 30m/min
X-axis acceleration: 9m/s²
X-axis feed force: 5000N
Z-axis working path: 320mm
Z-axis rapid traverse: 50m/min
Z-axis acceleration: 9m/s²
Z-axis feed force: 5000N
Y-axis working path: 100mm
Y-axis rapid traverse: 15m/min
Y-axis acceleration: 9m/s²
Y-axis feed force: 5000N
Stations: 14 with cylindrical shank holder D25x48
Tool carrier 2
X-axis working path: 110mm
X-axis rapid traverse: 30m/min
X-axis acceleration: 9m/s²
X-axis feed force: 5000N
Z-axis working path: 550mm
Z-axis rapid traverse: 50m/min
Z-axis acceleration: 9m/s²
Z-axis feed force: 5000N
Y-axis working path: 100mm
Y-axis rapid traverse: 15m/min
Y-axis acceleration: 9m/s²
Y-axis feed force: 5000N
Stations: 14 with cylindrical shank holder D25x48
Tool carrier 3
X-axis working path: 180mm
X-axis rapid traverse: 30m/min
X-axis acceleration: 9m/s²
X-axis feed force: 5000N
Stations: 14 with cylindrical shank holder D25x48
Godpfx Asyyuvtodioua