供給テーブルおよび積み下ろし装置付きパネルソー GIBEN Prismatic 2 h100 SPT（1999年製）

GIBEN Prismatic 2 h100 SPT

- Usable cutting length: 1600 mm
- Saw blade overhang: 100 mm
- Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel)

Panel dividing saw with infeed table and destacking device
Manufacturer: Giben
Type: Prismatic 2 h100 SPT
Year of manufacture: 1999
Technical data
Laedpfx Ajzuyywemfoh
- Usable cutting length: 1600 mm
- Saw blade overhang: 100 mm
- Clamping chuck opening: 117 mm
- Working height: 950 mm
- Lifting table dimensions: 1600 x 2700 mm
- Max. stack height: 620 mm
- Dimensions: 2444 x 1220 mm, 2500 x 1250 mm
- Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel)

High-speed saw carriage
- 2 guide shafts: 40 mm
- Saw carriage drive via frequency-controlled motor
- Feed speed: 1 - 100 m/min
- Return speed: 100 m/min

Adjustment of the saw carriage speed from the control panel.
Automatic cutting length control according to the panel dimensions
- Scoring saw speed: 5035 rpm
- Carbide-tipped saw blade speed: 3760 rpm
- Main saw motor power: 11 kW
- Scoring saw motor power: 2.2 kW
- Main saw blade: 400 mm
- Main saw spindle: 75 mm
- Scoring saw blade: 215 mm
- Scoring saw adjustment from the outside in stepped increments to: 0.025 mm
- Changing the main saw and the scoring saw via a quick-release system (pneumatic)

Sliding table
- Support table in the sliding table area with free-running roller rails
- Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers
- Sliding table drive via servomotor
- Drive torque: 6.5 Nm
- Feed speed: 1 - 60 m/min
- Return speed: 60 m/min
- Cable routing via drag chain
- 2 front aligners

Automatic infeed via lifting table
- Dimensions: 1600 x 2700 mm
- 4-column spindle lifting table with 12 free-running roller groups
- Automatic package height counting when lifting the panels via control
- Min. panel dimensions: 2000 x 1200 mm
- Max. stack height without pit: 620 mm
- Max. load: 12 t
- Infeed height: 330 mm

Support table
- 2 pcs support table with PVC surface 2000 x 510 mm

Machine control G-Drive 1D
Extraction
- 1 extraction port on the pressure bar: 115 mm
- 1 extraction port on the lower side of the machine bed: 200 mm
- The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips.

Performance parameters
- Average cycle time/saw cut: approx. 25 s

Quality
- Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels)
- Angularity: +/- 0.15 mm/m

Note:
The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。