作業用プラットフォーム付きセミトレーラー

FAYMONVILLE MAX Trailer MAX210 Telesattel Megatrailer

You can find our entire range of vehicles, including those available immediately and at short notice, on our website.

Excerpt from the equipment list. Full equipment details available on request.

Loading area:
* Loading platform in double-extendable design with pneumatically operated locking mechanism
* 2 pairs of recessed lashing rings (LC 5,000 daN)
* 1 pair of recessed lashing rings (LC 10,000 daN)
* 7 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)

Landing gear:
* JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)

Tyres:
* Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice

Axles:
* BPW axles, hydro-mechanically forced steering
* Air suspension with lift and lower valve
* Axle tool kit

Brake system:
* Brake system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit

Steel construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Paintwork:
* Top quality, long-lasting corrosion protection of the standard shot-blasted welded chassis, guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) top coat, single-colour in RAL 3002 carmine red
* Rear section metallised and painted in RAL 9010 (pure white)
* Wheel rims in silver
* Metallic paintwork not possible

Electrical system:
* Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets; connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098

Including accessories:
* Remote steering from front and rear via cable remote control with push buttons, with single-track axis control (without installation in the tractor unit)
* Electro-hydraulic power unit
* 4 wheel chocks with bracket on front wall
* 2-inch king pin
* Yellow-red air couplings on galvanised front connection panel
* Yellow reflective tape according to EU regulations – on the sides, on the sliding extension and at the rear of the trailer
* European reflective warning plates (red-yellow) at the rear of the trailer
* One mudflap at the rear of the trailer
* Manual and documentation on USB stick
* Loading area with heavy-duty hardwood floor
* 10 pairs of stake pockets for plug-in stakes, 100 x 50 mm, in the outer frame
* Bracket for rotating beacon at the rear
* Galvanised supports under the loading area taper
* Bracket for rotating beacon at the rear
Hfsdpfx Ajk Ugacoc Aeb
* Hook-in profile for ALU loading ramps at the rear of the vehicle
* 80 km/h speed stickers, rear and both sides
* Load gauge for axle load determination, including load chart
* Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
* Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard grease NLGI-2 and removable guard around the pump
* Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO)
* Anti-slip sand layer painted onto the centre beam
* 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; in the extension, an additional ...

この広告は自動翻訳されています。翻訳ミスがある可能性があります。