Operating hours: 336, First registration: 24.10.2024_____Two-engine version with JCB 55 kW / Stage 5 Dual-sided debris pick-up, towed Basic equipment Sweeper Controls Main control panel mounted at the center of the cab with JVM for displaying information on a wide range of sweeper functions, plus download capability for recorded data. Additionally, up to four camera images can be displayed on the JVM screen. A separate control console with palm rest for controlling primary sweeping functions is mounted on the door side. Suction fan Variable suction speed from 1800 rpm to 3500 rpm for adaptation to different applications. V65t: Higher transmission ratio: 1.79:1 Disc broom (gutter brush) Quick-change broom system with variable sweeping speed up to 160 rpm (cab-controlled). Highly visible signal yellow brush disc and hose guidance. Suction nozzle Suction nozzle made of cast aluminum with 250 mm diameter at the inlet and tool-free adjustment. Dust suppression system Spray heads for dust control are located at the suction nozzle(s), disc brooms, and along the front of the vehicle. "Pressadrain" water recycling system. EUnited 4-Star Certification according to PM10. Electronics 24 V. All external wiring harness connections conform to IP67 protection class. External noise / sound power level LWA 108 dB(A) for standard output engines, measured in accordance with EC Directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured according to EC Directive 2000/14/EC. Sweeper hopper The superstructure consists of the debris hopper and integrated water tank. Made of high-strength Inox (stainless) steel. Watertight rear door locking system with safety lock and drainage function. Two side maintenance doors and side storage compartments. A water sieve allows the hopper to be used as a large water tank for street flushing. Rear discharge flap, automatic multi-step hopper support, two protected rotating beacons at the rear, and LED work lights are standard equipment. Container volume 6.5 m³ Tipping angle 54° (nominal) Door opening angle 125° (nominal) Water tank The water tank equipped with baffle protection can be filled via a type 'A' hydrant. The double diaphragm pump is designed for continuous operation and even dry running. Water volume 1545 l (optionally 2000 l) Exhaust hood The smooth-surface exhaust hood is lined with frequency-tuned sound insulation. Brushes Roller brush diameter 406 mm Roller brush width 1275 mm Suction nozzle width 750 mm Disc brush 500 mm (opt. Ø 650 mm) Special equipment Sweeper auxiliary engine: JCB 55 kW turbocharged low-emission to Stage 5, REQUIRES EN590 (or similar) ULTRA-LOW SULPHUR FUELS Assembly of sweeping units on the right-hand side Final mounted on customer-supplied MB Atego 1324 - Air flow sieve in dirt container pneumatically raised and lowered - Shaker device for air flow sieve, pneumatically operated - Chain curtain in dirt container in front of air flow sieve - Water tank connection coupling type A, Storz 2 1/2 inch - Wastewater drain sieve with graduated perforation, mounted on the tailgate, enables more efficient
Hnodpfx Aswxn Uaoaheu
