BIESSE Brema EKO 2.2 縦型CNC加工センター（2022年製）

BIESSE Brema EKO 2.2

Technical Data
Machining Area
- X = 3200 mm
- Y = 1250 mm

Workpiece Dimensions
- Length X: 200 - 3200 mm
- Height Y: 35 - 1250 mm
- Thickness Z: 8 - 60 mm
- Maximum workpiece weight: 50 kg

Workpiece Reference System
The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table.

Workpiece Positioning Unit
The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors.

Workpiece Support Surface
The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine.

Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz

Air conditioning unit for the electrical control cabinet

bSolid control system

HP kit for the rapid movement of the workpiece clamping jaws
The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps.

Consent pedal for opening/closing the clamping jaw

BH28 drilling head with individually addressable spindles
Kdodozutraepfx Ac Asr
- 17 vertical spindles (7 in the X-axis, 10 in the Y-axis)
- 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis)
- 1 dado blade unit with a fixed working direction in X

11 kW electric spindle with HSK-F adapter with "C" axis torque
- 11 kW, 24000 rpm in S1 operation
- 6000 - 24000 rpm programmable via NC

Angle saw unit HSK F63 for saw blade
- Max. speed 8,400 rpm

Drilling and milling unit for top and bottom edges / end drilling and milling unit
- Max. speed 9,000 rpm
- Tool holder with ER20 collet

8-position tool changer magazine - disc changer

Accessory kit "Sensitive Surfaces" for workpiece transport

Laser device for manual reading of QR codes

SOPHIA - IoT Connection

Dowel Ø8x40 mm and glue insertion unit

Barcode2Hops with variables

MultiPost upgrade

POST_Element Splitter

NC-Hops 7.0

この広告は自動翻訳されています。翻訳ミスがある可能性があります。