Behringer HBP 420-723 G

Behringer HBP 420-723 G

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

The saw features a hydraulic clamping device that operates in both the vertical and horizontal directions. The roller conveyor on the feed side is 15 m long and is equipped with a manually controlled feed mechanism. On the discharge side, there is a 12 m long roller conveyor without a drive.
• Working area – Ø / flat at 90°: 420 mm / 720 mm x 420 mm
Knjdpfx Asx D N Ameahsc
• Working area – Ø / flat at 75° left: 420 mm / 710 mm x 420 mm
• Working area – Ø / flat at 60° left: 420 mm / 550 mm x 420 mm
• Working area – Ø / flat at 45° left: 420 mm / 450 mm x 420 mm
• Working area – Ø / flat at 30° left: 420 mm / 250 mm x 420 mm
• Working area – Ø / flat at 75° right: 420 mm / 710 mm x 420 mm
• Working area – Ø / flat at 60° right: 420 mm / 550 mm x 420 mm
• Working area – Ø / flat at 45° right: 420 mm / 450 mm x 420 mm
• Working area – Ø / flat at 30° right: 420 mm / 250 mm x 420 mm
• Smallest material dimensions – Ø / flat: 10 mm / 10 mm x 10 mm
• Smallest cutting length (90°): approx. 90 mm
• Remaining cutting length (manual, 90°): approx. 90 mm
• Cutting speed: 10–120 m/min
• System/belt tensioning pressure: 95 bar
• Connected load: approx. 9 kW
• Voltage: 400 V, 50 Hz
• Control/hydraulic valve voltage: 24 V DC
• Current consumption: approx. 18 A
• Fuse protection: 35 A
• Cable cross-section: min. 4 x 6 mm²
• Material support height: 800 mm

Additional equipment

• Silberland B 660 powered roller conveyor, 15 m (year of manufacture: 2010)
• Chip conveyor (0.15 kW motor)