エッジバンダー

OTT / Ligmatech Shark Quattroline / ZHR

Single-sided edge banding machine in right-hand configuration with workpiece return,
for hot melt or/and PU gluing,
used, manufactured in 2011; approx. 8700 operating hours

Edge thickness: 0.4 – 10 mm
Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm
Height max.: 60 mm Length min.: 150 mm
Feed speed: 14 – 20 m/min, stepless
Glue application: Glue application roller with Vario-melt metering system
Working height: 900 mm
Machine dimensions: Machine height: 1,600 mm
Machine width: 1,100 mm
Machine length: 8,200 mm
Hsdpezb Iuqofx Appjnp
Machine weight: 4,000 kg

Machine equipped with:
-Double roller pressure with electronic positioning
-Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC
-CM – CombiMelt gluing system:

Processing units:
-Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors,
2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled.
Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm
-AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar.
Including optical edge monitoring
-M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls.
With variable edge shaft for interchangeable edge.
With automatic selection menu.
-K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5°
-K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36
-Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction.
Sensing on one side, feed via program control.
2 HF motors 0.7 kW, 200 Hz, 12,000 rpm
Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70).
-HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction.
Sensing on both sides, automatically adjusted to edge thickness via program control.
With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm
Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools
-HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction.
Sensing on both sides, automatically adjusted to edge thickness via program control.
With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm
Tool: 2 HM radius reversible knife heads (AR 73),
Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3.
-AKF – Automated COPY MILLING with two separate working spindles for top and bottom.
2 HF motors 0.37 kW, 200 Hz, 12000 rpm
Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16.
With integrated extraction.
-AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT

-ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the
joint area – with extraction.

Additional equipment:
-AS – Antistatic spray device, double, on glue joint
-GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled
-RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface
-KEO-c – EDGE CLEANING, oscillating and automatically adjustable.
2 motors 0.2 kW, with 2 cloth disks
-WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts.
Interface for workpiece return Ligmatech ZHR 05 or comparable

この広告は自動翻訳されています。翻訳ミスがある可能性があります。