ベニヤプレスORMA
HL 5100x1400
ベニヤプレス
ORMA
HL 5100x1400
EXW 固定価格 消費税別
€49,000
状態
中古
(完全に稼働しています)
所在地
チェコ共和国 

基本データ
価格と所在地
EXW 固定価格 消費税別
€49,000
- 所在地:
- Draha 427, 66459 Telnice, Česká republika

電話する
オファーの詳細
- 広告ID:
- A18383796
- 更新:
- 最終更新日:19.11.2026
説明
Veneering press line, consisting of the following machines:
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
Ksdpfx Alovva Syebsdw
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
Ksdpfx Alovva Syebsdw
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
提供者
注意: 無料で登録するかログインして、すべての情報を取得してください。
登録日: 2020
10 オンライン広告
お問い合わせを送信
電話 & ファックス
+420 530 ... 広告
これらの広告もご興味があるかもしれません。
成功
あなたのメッセージが送信されました。
小型広告
Bitburg
9,337 km
グルー・スプレッダー
OsamaS4R/P-1400
OsamaS4R/P-1400
成功
あなたのメッセージが送信されました。
小型広告
Bad Oeynhausen
9,040 km
フィルム包装機
CMBEBC 150/70 ERL 150
CMBEBC 150/70 ERL 150
成功
あなたのメッセージが送信されました。
小型広告
Barntrup
9,047 km
CNC加工センター SCM Morbidelli N100 22-31 PROSPACE(2022年製)
SCMMorbidelli N100 22-31 PROSPACE
SCMMorbidelli N100 22-31 PROSPACE
成功
あなたのメッセージが送信されました。
小型広告
Sliven
8,871 km
ローラーコーター
CeflaSmartcoater MF EVO
CeflaSmartcoater MF EVO
成功
あなたのメッセージが送信されました。
小型広告
Barntrup
9,047 km
BIESSE Brema EKO 2.2 縦型CNC加工センター(2022年製)
BIESSEBrema EKO 2.2
BIESSEBrema EKO 2.2
成功
あなたのメッセージが送信されました。
小型広告
Timișoara
8,948 km
UV乾燥機
CeflaFV 2 / 3500-46 SERTARE UVR2M
CeflaFV 2 / 3500-46 SERTARE UVR2M
成功
あなたのメッセージが送信されました。
小型広告
Sesto Calende
9,611 km
梁用マシニングセンター
UniteamCovertek
UniteamCovertek
成功
あなたのメッセージが送信されました。
小型広告
トルコ
8,646 km
コマツPC350ロックバケット
KomatsuPC350 Rock Bucket
KomatsuPC350 Rock Bucket
成功
あなたのメッセージが送信されました。
小型広告
Roreto
9,744 km
アンローダ(シングルケージ
RBO (BIESSE Group)Tornado SC/FE 1300
RBO (BIESSE Group)Tornado SC/FE 1300
成功
あなたのメッセージが送信されました。
小型広告
Plovdiv
9,007 km
マシニングセンター
ITALMACPegaso
ITALMACPegaso
あなたの掲載は正常に削除されました
エラーが発生しました











































































































