プラスチック破砕プラント

mütek 630 K

Special machine
for shredding plastics
Base machine from €24,990 net

Well-suited for shredding:
- Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc.
- Semi-rigid thermoplastics such as PVC, PP, PE, PS, PU, PET

Includes:
- Special rotor with embedded blades (reduced load absorption),
- Small cutting gap between blade and counter-blade

Motor: 18.5 kW; 400 V - 50 Hz - 3 phase
Control: PLC

Cutting unit opening (top) 600 x 800 mm
The parts should be a maximum of approx. 500x500 mm
*the height is less relevant

Hydraulically operated slide
Screen size as required (25 - 40mm)
For plastics, coarser screens are recommended (30-40 mm)
*If you want to shred finer, a two-stage shredding process with a downstream granulator type MVZ (screens 5-15 mm) is recommended.

Suction nozzle Ø 160 mm
Weight approx. 1,300 kg
Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm

Further options available at an extra charge:
- Raise shredder by approx. 25 cm (preparation for conveyor belt removal) + €1,980 net
- Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Start and stop synchronized with the shredder)
- Alternatively, manual start and stop on the conveyor belt + €595 net

Requirements for the raw material:
- The moisture content (as received) must be below 25%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. It is also possible for you to send us your material by freight forwarder, and we will document the test with photos and videos.

---
*only for brittle plastics with medium hardness,
*not for elastic or extremely hard and heavy plastics - this would affect the durability of the system.
---

Optionally, the next larger machines would be available:

Base machine: Shredder MGZ 830 K-S - 18.5 kW

Cutting unit opening (top) 800 x 1,000 mm
The parts should be a maximum of approx. 720x700 mm
*the height is less relevant

from €39,995 net * Options depending on effort

Base machine: Shredder MGZ 1030 K-S - 22 kW

Cutting unit opening (top) 1,000 x 1,000 mm
The parts should be a maximum of approx. 900x700 mm
*the height is less relevant

from €49,975 net * Options depending on effort

Base machine: Shredder MGZ 1330 K-S - 37 kW
Bsdpfxod H R Sxs Amnodi

Cutting unit opening (top) 1,300 x 1,200 mm
The parts should be a maximum of approx. 1,200x700 mm
*the height is less relevant

from €79,975 net * Options depending on effort

この広告は自動翻訳されています。翻訳ミスがある可能性があります。