立形マシニングセンタ

müga iUltimate i42-2s

#K
CNC Lathe Müga
Type / Model iUltimate i42-2s
Control Mitsubishi M830
Condition New
#ABAN
Technical Data
Axes: "10 NC Axes"
Main Spindle: X1, Y1, Z1, C1, B1
Counter Spindle: X2, Y2, Z2, C2, B2
Description Main Spindle
Spindle Speed 6000 rpm
Motor 7.5/11 kW
Chuck 173E A5 spindle nose
Spindle Bore 42 mm
Driven Tools 12, 1.5 kW, 4000 rpm
Tool Holder ER 20
OD Tool Holder 20 mm x 6 pcs
ID Tool Holder 20 mm x 5 pcs
X/Y/Z Travel Ø 300 / Ø 770 / 250 mm
Servo Motor 1.5 kW
Rapid Traverse 30 m/min
Hydraulic Motor 0.75 kW, 75 l
Coolant Pump 1.5 kW, 240 l, 5 bar, 75 l
B Axis Motor 0.75 kW, 360°
C Axis braked
Description Counter Spindle
Spindle Speed 6000 rpm
Motor 2.2/3.75 kW, built-in
Chuck 173E A5 spindle nose
Spindle Bore 30 mm
Driven Tools 12, 1.5 kW, 4000 rpm
Tool Holder ER 20
OD Tool Holder 20 mm x 5 pcs
ID Tool Holder 20 mm x 9 pcs + extension.
X/Y/Z Travel Ø 900 / Ø 770 / 300 mm
Servo Motor 1.5 kW
Rapid Traverse 30 m/min
Coolant Pump 2.0 kW, 25 bar, 30 l
Part Ejector Pneumatic
B Axis Motor 0.75 kW, 360°
C Axis braked
Total Tools 49
Dimensions L x W x H approx. 3.8 m x 2 m x 2 m
Weight approx. 5600 kg

Travels Rapid Traverse
X1 Ø 300 mm 30000 mm/min
Y1 Ø 770 mm 30000 mm/min
Z1 250 mm 30000 mm/min
X2 Ø 900 mm 30000 mm/min
Y2 Ø 770 30000 mm/min
Z2 300 mm 30000 mm/min
C1 360° 60 rpm
C2 360° 60 rpm
B1 360° 30 rpm
B2 360° 30 rpm

Features:
Linear axes with servo motors
The 6 linear axes are equipped with Mitsubishi servo motors and directly coupled to the ball screw. This ensures maximum accuracy.
Simultaneous machining on main and counter spindle
Two programs (workpiece front and back) can be processed independently on the main and counter spindle.
Synchronous part removal
The workpiece can be removed during rotation, so that one workpiece can be machined while another is being removed.
B-axis inclined machining
The iUltimate is equipped with two swivel heads on the main and counter spindle, allowing for machining on both sides at an angle.

Equipment:
Swiveling control panel
Driven tools
Workpiece clamping device
Workpiece conveyor belt
Extendable chip conveyor
Coolant system
4x internal coolant for main spindle
Intelligent handwheel
Bjdpozv Thksfx Abysdi
Collet chuck 173 E
Interface for bar loader
C-axis main and counter spindle
Disc brake for C-axis main and counter spindle
Y-axis main and counter spindle
Central lubrication
Work area light
Signal light on the machine
Control cabinet heat exchanger
Mounting elements
various tools

この広告は自動翻訳されています。翻訳ミスがある可能性があります。