ワイドベルトサンダ

Kündig Perfect -2 1350 REd-L sofort verfügbar -

Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use –
Wide-belt sanding machine including version for intermediate sanding of coatings

Special price for showroom machine – in-house exhibition machine –

- Robust, space-saving W-type wide-belt sanding machine for the highest demands.
- Constant working height thanks to adjustable headstock
- Working width: 1350 mm
- Top-grinding, with 2 sanding units

- Grooved rubber contact roller in proven hardness
- Contact roller level adjustable in stages according to a grit scale
- Electric raising/lowering of the contact roller according to the selected unit
- Electronically controlled segment sanding pad
- Entire sanding pad unit adjustable by 10 degrees
- Parallel spring-mounted, ground steel pressure roller at the infeed
- Rubber-coated pressure roller between the sanding units and at the outfeed

- 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz
- Motor-driven fine adjustment of the height with digital display
- Belt tension, control and oscillation pneumatically controlled
Compressed air consumption approx. 2 l/min
- Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc.
- Workpiece feed 2.2 KW with transport belt and drive roller
- Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces
- Automatic thickness adjustment over the entire working width
- Workpiece over-thickness protection with feed instant stop and lifting mechanism
- Infinitely adjustable chip removal rate
- Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min
- PLC control with Teach-In memory
- Pneumatic belt control
- Workpiece support with roller at the infeed and outfeed
- Enormatic: Fully automated quick setting and feed release
- Eco energy-saving mode
- Fault diagnosis
- Passage height 210 mm up to 18.5 KW
- Sanding belt dimensions 1350 x 2000 mm
Lajdpfjk Dpp Sex Ah Dsg

Perfect – Features:
High-quality swiveling plexiglass control panel
- 10-inch touch screen
- Industry control
- Automatic pressure regulation and storage of the sanding pad elements
- Electronic compensation of the sanding belt grit size
- Cycle counter and operating hour counter

Coating equipment
- Infinitely adjustable sanding belt speed on the 2nd unit
- Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process
- Electronic sanding pad with a segment width of 22 mm
- Additional sanding pad insert

Additional options included with the machine:

Fold-down outfeed table extension (without top)
C10) LED package
ASB5+AS3) ECS workpiece blowing system with fan

Location: 54634 Bitburg
- Available immediately -

この広告は自動翻訳されています。翻訳ミスがある可能性があります。