エッジバンディングマシン IMA Novimat/I/G80/650/R3（2009年製）

IMA Novimat/I/G80/650/R3

Edge banding machine
Manufacturer: IMA
Type: Novimat/I/G80/650/R3
Year of manufacture: 2009
Technical data
- Workpiece overhang from the chain conveyor: 38 mm
- Feed width: min. 65 mm (with max. workpiece thickness of 25 mm)
- Workpiece length in feed direction: 150 mm
- Overall height (top edge of chain conveyor): 960 mm
- Feed speed: approx. 6 - 30 m/min, electrically adjustable
- Machine control system ICOS open compact

Workpiece
- Workpiece length: min. 150 mm
- Workpiece width: min. 65 mm
- Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function)
- Smallest workpiece: 150 x 150 mm or 65 x 300 mm
- Edge material: paper, plastic and veneer
- Height: 14 - 65 mm
- Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm)
- Max. upper edge overhang: 5 mm

Units
Cjdpezuyi Ejfx Agqjrh
Infeed area
- Release agent applicator mounted at the top and bottom, not adjustable

Edge trimming
- 2 motors 4.5 kW, 150 Hz, 9000 rpm
- incl. frequency inverter with braking function
- Motor 1 counter-rotating
- Motor 2 co-rotating

Gluing unit VTG 3-6
- with one preheating nozzle 300 mm for preheating the workpiece edge
- 6-position edge magazine for roller material 0.3 - 3 mm thick.
- 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable

Glue application
- with pneumatic quick-lock system
- Chem-Coat coating
- electronic temperature control
- Volume 0.8 l

Pre-melting tank approx. 1 l
- Heating power 3 x 400 W
- with EVA glue, approx. 7.0 kg/h
- with filler-free glue, approx. 5.0 kg/h

Cutting unit
- 2 motors 660 W, 200 Hz
- incl. frequency inverter with braking function
- pneumatic pivoting 0+25 for straight and bevel cutting

Flush trimming
- 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm
- with HSK 25 shank
- incl. frequency inverter with braking function

Multi-profile trimming unit
- 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm
- with HSK 25 shank
- incl. frequency inverter with braking function
- for trimming 4 profiles
- with stepper motor axes for horizontal and vertical positioning

Contour trimming unit KFA x30
- 1 motor 500 W, 400 V, 400 Hz, 18000 rpm
- Program-controlled conversion for up to 4 profiles
- incl. fine positioning for different edge thicknesses

Multi-profile scraping blade
- Stepper motor axes for horizontal and vertical positioning
- Scanning from above and below (max. 4 profiles)
- Scanning from the side via pneumatic pressure

Spray nozzles at the top and bottom for applying cleaning agents
- fixed, not adjustable

Surface scraping blade
- with height sensing skid
- electronically controlled horizontal positioning

Buffing unit
- 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm
- 1st motor pair with cloth-sisal discs 50x160x19 mm
- 2nd motor pair with polishing discs 50x160x19 mm
- The motors operate in the same direction and are both tilted and pivoted in the feed direction.
- Each motor can be individually adjusted vertically

2x NC-controlled grooving
- 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm
- incl. frequency inverter with braking function
- one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function
- Horizontal, stepless adjustment with AC servo motor for grooving unit

Workpiece return
Note:
The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。