スライスパン包装機付きパンカッティングマシン

Hoba en AVT b.v.

A-251101 Slicer:
For sale: Item A251101.
Holly Slicer, painted frame and stainless steel body.

Machine information:
Total machine length: 1.9 meters
Total machine width: 1.0 meters
Total machine height: 2.1 meters
Machine working height: 0.9 meters

Machine capacity: 1800 loaves per hour

Electrical information:
Power connection: 400 volts, neutral and earth.
Power consumption: 3.2 kilowatts.
Plug connection: CeeForm 5-pin 16 Amp. (round red plug.)
Compressed air: Not required.

Minimum and maximum product dimensions:
Products from 100 to 320 mm long.
Products from 80 to 210 mm wide.
Products from 40 to 150 mm high.

Machine version:
Frame made of painted steel, RAL 7046. Deck, stainless steel ASI 304 and plastic rollers and 2 side belts, manufacturer Hoba.
Band slicing machine, mounted on nylon wheels.

A-251102: Semi-automatic packaging line.
Item A-251102
Refurbished semi-automatic (manual) packaging line equipped with a blowing table, Kwik Lok brush machine, and clip-closing machine.

Semi-automatic (manual) painted packaging line equipped with a Kwik Lok brush machine, type 1082, a Kwik Lok clip-closing machine, type 871A, and a bag-opening blowing table.
Machine direction of operation: left to right

Machine information:
Total machine length: 3.5 meters
Total machine width: 1.5 meters (including blowing table)
Total machine height: 1.8 meters
Working height: 0.75 meters
Length of conveyor section: 1.8 meters
Length of roller conveyor: 1.0 meter
Conveyor flight spacing: 305 mm

Machine capacity: 1800 packages per hour
Electrical information:
Power supply: 400 V, N + PE
Connected load: 1.2 kW
Plug type: CEE-Form, 5-pin, 16 A (round red plug)
Compressed air required: No

Minimum and maximum product dimensions:
Product length: 100–350 mm
Product width: 80–210 mm
Product height: 40–160 mm

Machine description:
The frame and both leg assemblies are manufactured from painted profiles, manufactured by Waterlander. The machine is equipped with a Kwiklok brush machine, model 1082, and a Kwik Lok clip-closing machine, model 872, year 1995 (completely rebuilt), suitable for Kwik Lok JNRP clips and Schutte clips. At the end of the packaging line, a 1-meter-long roller conveyor is provided for manually removing the packaged products.
The machine is mounted on wheels and is equipped with conveyor flights with a fixed transport speed. The machine is fitted with a completely new control system and has been fully refurbished. The machine is finished with a two-component, high-durability topcoat.

The machine is suitable for packaging food and non-food products in plastic bags.

Lredpez Ervpsfx Albet
Included: with the machine, a painted Hoba blowing table, stainless-steel top surface, and product guides.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。