エッジバンダー

Hebrock AKV 3005 DK -F airtronic

with jointing cutter aggregate including DIA tools
Jointing thickness up to 40 mm, workpiece thickness up to 3 mm
Combination milling station with R 2.5 mm radius
Technical description:
- Hot-melt glue application to the workpiece for edge material up to 3 mm
- 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate
- Maintenance-free, coated glue pot
- HF end-trimming station (16,000 rpm) for front and rear edge overhang
- HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side
- Spare spaces for additional processing aggregates (Hebrock system)
- Feed rate approx. 10 m/min
- Adjustable cut depth for the end trimming saw
- Signal lamp for workpiece sequence
- Robust chain drive
- Ergonomically arranged control panel
- Double roller top pressure beam
- Aggregate view windows from machine rear and operator side
- PLC control including touchscreen
Technical data:
- Feed rate 10 m/min
- Panel thicknesses from 8 - 40 mm
- Weight: depending on configuration, approx. 1400 kg
- Dimensions (L x W x H): 5000 x 1445 x 1600 mm

Airtronic for machines up to 8 mm edge thickness, 1 unit
Technical data:
- Edge thickness from 1.2 mm – 3.0 mm possible
- Maximum panel thickness 25 mm
- Feed speed 7 – 10 m/min depending on edge material
- Ready for operation in 3 min
- Air consumption approx. 800 l/min for the entire machine
- Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw
- Extraction as previously
- PLC control is mandatory
Fjdpsyfp N Defx Abkoga

Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness)
Including pneumatic saw adjustment
Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius)
Buffing station (polishing mop), 1 unit
Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius
Maximum workpiece thickness: 40 mm
Minimum workpiece length: 300 mm
Radius R 2.0 mm
Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm
Flat scraper, 1 unit, with pneumatic insertion control
Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath
Special cleaning system for PU glue discharge underneath, 1 unit
60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm
Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm
Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards
Ball bearing for corner rounding cutter, 24.1 mm, 1 unit
Ball bearing for corner rounding cutter, 24.2 mm, 1 unit
Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only)
Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only)
Release agent sprayer, 1 unit
Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue
Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

この広告は自動翻訳されています。翻訳ミスがある可能性があります。