HAAS VM-6

HAAS VM-6

This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details.

• Spindle nose to table: max 864 mm (34.0 in), min 102 mm (4.0 in)
• Spindle
• Max torque: 122.0 Nm @ 2000 rpm (90.0 ft-lbf)
• Drive system: Inline direct-drive
• Taper: CT40 | BT40 | HSK-A63
• Lubrication: Air/oil injection
• Cooling: Liquid cooled
• Table
• Length: 1626 mm (64.0 in)
• Width: 711 mm (28.0 in)
• T-slot width: 15.90–16.00 mm (0.626–0.630 in)
• T-slot center distance: 125 mm (4.92 in)
• Max weight on table: 1814 kg (4000 lb)
• Feedrates and thrust
• Max cutting feedrate: 12.7 m/min (500 ipm)
• Rapids (X/Y/Z): 15.2 m/min (600 ipm)
• Max thrust X: 15,124 N (3400 lbf)
• Max thrust Y: 18,238 N (4100 lbf)
• Max thrust Z: 24,910 N (5600 lbf)
• Tool changer
• Type: SMTC (side-mount)
• Capacity: 30+1
• Max tool diameter (full): 64 mm (2.5 in)
• Max tool diameter (adjacent empty): 127 mm (5.0 in)
• Max tool length: 406 mm (16 in)
• Tool-to-tool time (avg): 2.80 s
• Chip-to-chip time (avg): 3.60 s
• Utilities
• Coolant capacity: 360 L (95 gal)
• Air required: 113 L/min @ 6.9 bar (4 scfm @ 100 psi)
• Minimum air pressure: 5.5 bar (80 psi)
• Electrical
Ppedpfxeyt Riuo Amler
• Input AC voltage (3-phase) low: 220 VAC, full load amps: 70 A
• Input AC voltage (3-phase) high: 440 VAC, full load amps: 35 A

Technical Specification
Taper Size ISO 40