エルゴマグ社製磁気研磨装置Forplan
PM 3000
エルゴマグ社製磁気研磨装置
Forplan
PM 3000
製造年
2023
状態
中古
(完全に稼働しています)
所在地
Pforzheim 

基本データ
価格と所在地
- 所在地:
- Hanauer Straße 5-7, 75181 Pforzheim, Deutschland

電話する
技術詳細
寸法と重量
総重量:
220 kg(キログラム)
全長:
875 mm
全幅:
1,010 mm
全高:
1,610 mm
出力詳細
入力電圧:
230 V
入力電流の種類:
三相
安全機能
非常停止
書類および認証
ドキュメント / マニュアル
オファーの詳細
- 広告ID:
- A23342666
- 更新:
- 最終更新日:16.11.2026
説明
Forplan Ergomag PM 3000 with ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, and centrifugal dryer, type 270, year of manufacture 2023.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
Hedpfe Aknwmsx Adtsfp
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
Hedpfe Aknwmsx Adtsfp
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
提供者
注意: 無料で登録するかログインして、すべての情報を取得してください。
最後のオンライン:本日
登録日: 2026
2 オンライン広告
お問い合わせを送信
電話 & ファックス
+49 7231 ... 広告
あなたの掲載は正常に削除されました
エラーが発生しました














