CHIRON FZ 12 KW + Fanuc M - 20iA（2011年製）

CHIRON FZ 12 KW + Fanuc M - 20iA (2011)

This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011)

Lsdpfx Ajzvyaajhyjaf
Machine Benefits

Technical Machine Benefits

• Controlled axes: 6 axes
• Reach: 704 mm
• Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds
• Clamping surface: 820 x 440 mm²
• Drilling capacity in st 60: Ø 16 mm
• Tapping: m 16
• Milling capacity in st 60: 80 cm³/min
• Acceleration: x & y axis 0. 7 g, z axis 1. 0 g

Extra Information
Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.