完全製材所(据え置き型)Brenta
Verticale bandzaag / automat. draaiwagen
完全製材所(据え置き型)
Brenta
Verticale bandzaag / automat. draaiwagen
EXW VB 消費税別
€69,985
製造年
1986
状態
中古
(完全に稼働しています)
所在地
Beilen 

機械に関するデータ
価格と所在地
EXW VB 消費税別
€69,985
- 所在地:
- Beilen, オランダ

電話する
オファーの詳細
- 広告ID:
- A21600703
- 更新:
- 最終更新日:19.06.2026
説明
We offer this used Brenta vertical bandsaw with an automatic turning carriage.
Year of manufacture: 1986
Vertical saw:
Type: Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type: Progress 750 Machine no.: 409621 S268 N1143886
Maximum sawing length: 12 meters
The various photos show:
- overall view of the saw
- saw machine plate
- saw with dust extraction pit
- automatic line behind the saw
- pit under the lower wheel
- feed line from the outside
- feed line as seen from the inside
- discharge line inside
- additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain
- collection bin behind the discharge line
- collection bin as seen from the other side. With a red button that can be operated from here and in the machine room
- discharge line in its entirety
- machine plate for the saw carriage
Dwjdpfx Aioyxhq Uo Hob
- saw carriage in the outside position, where the log can be placed
- control room behind the saw
- control room for electronic dimension setting and operation of all feed and discharge lines
- electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually
- Compressor: Atlas Copco GX 11 FF
- Type plate compressor, year of manufacture 2005
- Air dryer: Grass Air type DW 31
- Stellitem adjustment blocks for the guides through which the saw blades pass
Technical information:
- the machine must be operated with air, hydraulics, and electricity (and control current)
- the wheels (upper and lower) were ground approximately three years ago and can last for many more years
- control cabinet for the feed line was renewed in 2025
- at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment.
This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination.
The stated price is based on the Incoterm EXW, including disassembly by the buyer.
If you have any questions or would like more information, please feel free to send us a message or call us.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
Year of manufacture: 1986
Vertical saw:
Type: Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type: Progress 750 Machine no.: 409621 S268 N1143886
Maximum sawing length: 12 meters
The various photos show:
- overall view of the saw
- saw machine plate
- saw with dust extraction pit
- automatic line behind the saw
- pit under the lower wheel
- feed line from the outside
- feed line as seen from the inside
- discharge line inside
- additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain
- collection bin behind the discharge line
- collection bin as seen from the other side. With a red button that can be operated from here and in the machine room
- discharge line in its entirety
- machine plate for the saw carriage
Dwjdpfx Aioyxhq Uo Hob
- saw carriage in the outside position, where the log can be placed
- control room behind the saw
- control room for electronic dimension setting and operation of all feed and discharge lines
- electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually
- Compressor: Atlas Copco GX 11 FF
- Type plate compressor, year of manufacture 2005
- Air dryer: Grass Air type DW 31
- Stellitem adjustment blocks for the guides through which the saw blades pass
Technical information:
- the machine must be operated with air, hydraulics, and electricity (and control current)
- the wheels (upper and lower) were ground approximately three years ago and can last for many more years
- control cabinet for the feed line was renewed in 2025
- at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment.
This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination.
The stated price is based on the Incoterm EXW, including disassembly by the buyer.
If you have any questions or would like more information, please feel free to send us a message or call us.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
提供者
注意: 無料で登録するかログインして、すべての情報を取得してください。
登録日: 2026
2 オンライン広告
お問い合わせを送信
電話 & ファックス
+31 6 558... 広告
これらの広告もご興味があるかもしれません。
小型広告
Dugo Selo
9,217 km
ロッドマシニングセンター
ElumatecSBZ 151
ElumatecSBZ 151
小型広告
Karben
9,214 km
真空乾燥室、加熱プレート乾燥機
ISVE1,5
ISVE1,5
小型広告
София
9,059 km
活字印刷機
HeidelbergTiegel GTS Hot foil
HeidelbergTiegel GTS Hot foil
小型広告
Kocēni
7,876 km
バンドソー用丸太デッキ
MUL2/8
MUL2/8
小型広告
Szczecin
8,687 km
ガラス用デジタル印刷機
Dip-TechGlassJet AR6000
Dip-TechGlassJet AR6000
小型広告
Budapest
8,922 km
重厚なシェルフ
Hilo
Hilo
小型広告
Ystad
8,556 km
包装機
KLIKLOKCERTIWRAP C-80
KLIKLOKCERTIWRAP C-80
小型広告
Agios Athanasios
9,119 km
エキセントリック・プレス・ダブルスタンダー
SGPPEZZ 500/1700/1000
SGPPEZZ 500/1700/1000
小型広告
Dianalund
8,646 km
パレットベンダー/パレバイター
ToppyMobile / stationary
ToppyMobile / stationary
小型広告
Oberbayern
9,242 km
完全製材所(据え置き型)
Möhringer / PaulOSS75 / KME2
Möhringer / PaulOSS75 / KME2
あなたの掲載は正常に削除されました
エラーが発生しました





































































































































