立形5軸CNC加工センター

Wenzler VKM 1-1

5-Axis Machining Center

This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished.

In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours).

Machine operating hours: 24,000

Working area:
-> X-axis 1500 mm
-> Y-axis 1250 mm
-> Z-axis 880 mm

Feed rate / Rapid traverse:
-> X-axis 100 m/min
-> Y-, Z-axis 100 m/min

Axis acceleration:
-> X-, Y-axis 7 m/s²
-> Z-axis 10 m/s²
-> Jerk 150 m/s³

Table load capacity:
-> Max. weight 400 kg
Hodszc Ekrepfx Ag Ijnn

Spindle:
-> Tool holder HSK 100
-> Speed range 10,000 rpm
-> Power (S6/40% duty) 40 kW
-> Max. torque 175 Nm

Tool magazine:
-> Positions 36
-> Max. tool length 520 mm
-> Max. tool diameter (with free adjacent slot) 205 mm
-> Max. tool weight 20 kg
-> Total load 200 kg
-> Tool change time 3 s

with chip conveyor and chiller/cooling unit
• Manufacturer: Lahntechnik GmbH
• Model: KESY 280-01
• Serial number: 2017-05981
• Year of manufacture: 2017
• Power rating: 13.6 kW
• Nominal voltage: 400 V / 3~ / PE / 50 Hz
• Control voltage: 24 V DC
• Protection class: IP 54
• Refrigerant: R410A – 10.03 t CO₂ equivalent
• Max. operating pressure: 30 bar (HD) / 19 bar (ND)
• Empty weight: 400 kg
• Country of origin: Germany

The machine/asset does not include any product-related tools/fixtures or grippers (robots).

The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025.

Transport locks are not required.
For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。