VIOLI ドローイングベンチ VMTRI253S

VIOLI Drawing bench VMTRI253S

VIOLI Drawing Bench VM/TRI25-3s

Manufactured in 2023

The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality.

TECHNICAL SPECIFICATIONS

Useful Length: 3 Meters

Pulling Power: 2,500 kg

Drawing force: Max. daN 2500

Operating hydraulic pressure: 180 bar

Drawing speed: Min. 0 m/min. - Max. 17 m/min.

Drawing reduction: Around 15% of the section

Fedpfx Aoyl U Sqjkpjpp
Clamping force POINTER: 100 Ton

Tolerance: 1 mm

Power supply: 400 V - 50 Hz

Electric power: 9,2 KW

Hydraulic oil: ISO 46

Motor Power: 9.2 kW - 380 V, 50 Hz

Noise: At the workplace LP < 70 dB(A)

Hydraulic System: Proportional hydraulic pump

Carriage Sliding: with ball circulation guides

Construction and movable installation of a hale holder to house 1 O hales in line with the trolley;

Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank;

Adjustable Die holder;

Bar support system;

Tank with pump for lubrication;

Opening/ closure of pliers operated manually by pneumatic pistan;

Compliance: Machine comply with the UE conformity regulations.

DETAILED FEATURES

Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke.

Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke.

Pulling Power: The pulling power is in line with the drawing die.

Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics.

Tolerance: The tolerance is 1 mm.

Hydraulic System: Features a proportional hydraulic pump.

Motor Power: 9.2 kW - 380 V, 50 Hz.

Carriage: Carriage sliding with ball circulation guides.

Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley.

Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank.

Die Holder: Adjustable.

Bar Support: Includes a bar support system.

Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston.

Control Panel: The machine is equipped with a control panel

FUNCTION

The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section.

COMPOSITION OF THE DRAWING BENCH

The machine is composed of the following main components:

- Metal structure
- Carriage equipped with a hydraulically controlled clamp
- Carriage drive unit
- Hydraulic system
- Electrical system

Metal structure

The metal structure is composed of a recirculating ball guide.

At the end of the rails, a suitable sized plate supports t...