TAKISAWA CNC旋盤 モデルTS-4000Y

Takisawa

TAKISAWA TS-4000YS FANUC 32i-B JAPAN
Manufactured in Japan
High rigidity (weight 6,200 kg, 30° slant bed, box guideways)
- Main spindle: 22 kW with max. torque of 618 Nm
- High performance and robust machine bed allow for heavy duty chip removal
- Y-axis

Technical Data:
Capacity
Max. swing diameter: Ø 600 mm
Max. turning diameter and length: Ø 370 x 750 mm
Bar capacity: Ø 82 mm

Spindle
Center height from floor: 1,140 mm
Spindle bearing/through bore diameter: Ø 140 / Ø 90 mm
Spindle nose: A2-8
Spindle speed: 4,200 rpm
C-axis resolution: 0.001°

Travels and Rapid Traverse
Travel
X-axis = 267 mm Z-axis = 840 mm
Y-axis = -50 ~ +70 mm A-axis = 780 mm
Rapid traverse
X-axis = 30 m/min Z-axis = 30 m/min
Y-axis = 10 m/min A-axis = 30 m/min

Power
Spindle motor (30 min / 100% duty cycle): AC 22 / 15 kW
Bodpfx Adexqmrxoujww
Max. torque: 618 Nm (S3 25%)

Driven Tools
Number of turret stations: 15
Max. tool speed: 6,000 rpm
Drive power (30 min / 100% duty cycle): 7.5 / 3.7 kW
Max. torque: 48 Nm

Tooling
Driven tool stations: 15
Tool cross-section: 25 x 25 mm
For boring: Ø 40 mm

Dimensions
Height: 2,300 mm
Depth (without chip conveyor): 2,140 mm
Width (without chip conveyor): 3,000 mm
Net weight: 6,200 kg

Included Options:
FANUC Data SERVER
- TOP AUTOMAZIONI X FILES BAR FEEDER INTERFACE
- KITAGAWA B6210 POWER CHUCK
- AXIAL DRIVEN UNIT
- RADIAL DRIVEN UNIT
- UNILOCK SMS 80 COLLET HOLDER
- TRANSFORMER
- STD TOOL HOLDER SET
- BAR PUSHER PREPARATION
- TOOL SETTER
- CHIP CONVEYOR
- PARTS CATCHER ARM
- 3 EXTERNAL TOOL HOLDERS
- 2 BORING BAR HOLDERS
- 1 FRONT GROOVING TOOL HOLDER
- 2 INSERT DRILL HOLDERS
- 1 CUT-OFF TOOL HOLDER
- 2 AXIAL DRIVEN TOOL HOLDERS
- 2 RADIAL DRIVEN TOOL HOLDERS
- 6 BUSHINGS (OD 40 mm - Reductions 32, 25, 20, 16, 12, 10)
- 3 DRILL BUSHINGS (OD 40 mm - Reductions 32, 25, 20)
- FOOT PEDAL FOR POWER CHUCK OPEN/CLOSE
- RIGID TAPPING
- C AXIS
- Y AXIS
- FULL GUARDING
- 8 BAR COOLANT SYSTEM
- MEASUREMENT AND DRAWING PROGRAMMING
- PROGRAM EDITING DURING OPERATION
- PROGRAM MEMORY 1,280 m
- PROGRAMMABLE DIMENSIONS INPUT
- TYPE B & C PROGRAMMING CODES
- DRILLING CYCLES
- UP TO 1,000 PROGRAMS SAVABLE
- SPINDLE ORIENTATION
- CONVERSATIONAL PROGRAMMING SOFTWARE Tiwap-1 is
- RAKU RAKU MONITOR (TOOL LOAD AND LIFE MONITORING)
- END-OF-CYCLE/PWR-OFF LIGHTS
- M FUNCTION FOR ACTUATING POWER CHUCK
- HYDRAULIC UNIT
- WORK LIGHT
- SERVICE KEYS
- ELECTRICAL DIAGRAMS/MANUALS

この広告は自動翻訳されています。翻訳ミスがある可能性があります。