木質チップ乾燥機SPE Renergi
木質チップ乾燥機
SPE Renergi
固定価格 消費税別
€20,000
状態
中古
所在地
Cēsis 

機械に関するデータ
価格と所在地
固定価格 消費税別
€20,000
- 所在地:
- Valmieras iela 20A, LV4101 Cesis, LV

電話する
オファーの詳細
- 広告ID:
- A19296676
- 更新:
- 最終更新日:03.12.2025
説明
SPE Renergi Low Temperature Dryer.
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
Ncsdpfx Abowp Rqfjlou
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price:20,000.00 EUR (VAT is not included)
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
Ncsdpfx Abowp Rqfjlou
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price:20,000.00 EUR (VAT is not included)
提供者
注意: 無料で登録するかログインして、すべての情報を取得してください。
登録日: 2022
2 オンライン広告
お問い合わせを送信
電話 & ファックス
+371 27 3... 広告
これらの広告もご興味があるかもしれません。
小型広告
Österreich
9,166 km
木材チップ暖房
Heizomat50 kw
Heizomat50 kw
小型広告
Sükösd
9,029 km
RP木材乾燥機
RPNF28
RPNF28
小型広告
Bielefeld
9,063 km
Cutter cut expert ecocam 2 / プロッター
expert international gmbhcut expert ecocam 2
expert international gmbhcut expert ecocam 2
小型広告
Lagedi
7,767 km
ステーショナープレス容器
HusmannSI- SEL- V2
HusmannSI- SEL- V2
小型広告
Jüri
7,772 km
ブリケット成形プレス
RUF GmbH&Co.KGRUF Lignum R2
RUF GmbH&Co.KGRUF Lignum R2
小型広告
Narva-Jõesuu
7,621 km
デバーカー
CambioCambio 500
CambioCambio 500
小型広告
Velp
9,212 km
ペレットプレス Andritz Paladin 600B
AndritzPaladin 600B
AndritzPaladin 600B
小型広告
Tauberbischofsheim
9,226 km
四面かんな盤 WEINIG 型式 Profimat 23E
WeinigProfimat 23E
WeinigProfimat 23E
小型広告
Martin
8,813 km
練炭プレス
2 x RUF 330 briquetter - complet line330
2 x RUF 330 briquetter - complet line330
小型広告
Velp
9,212 km
ペレットプレス Aarsen のペレットプレス
Van Aarsen PelletmillC750
Van Aarsen PelletmillC750
あなたの掲載は正常に削除されました
エラーが発生しました



































































































