プロファイルモールディングマシン SCM Superset NTE（2008年製）

SCM Superset NTE

Profiling machine
Cedpjzuzfhjfx Agqsrh
Manufacturer: SCM
Type: Superset NTE
Year of construction: 2008
Technical data
- Touchscreen control for the machine with 6 spindles + UNIWAVE
- Spindle speed 8,300 rpm
- Working width 240 mm, working height 125 mm, electronic
- Touchscreen control MOBILE 10
- HSK 85S
- SPINDLE QUICK-CHANGE SYSTEM T-SET
- QUICK-CLAMPING DEVICE for tools
- 7 shafts as a UNIWAVE, suitable for separating
- 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm
- Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup)
- Manual pump for lubricating the working table
- WITH machining tool
- Min. working width (finished size) mm 15
- Max. working width (finished size) mm 240
- Min. length of the individual workpiece mm 450
- Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4
- Motor power surfacing spindle kW 7.5, quick-clamping device
- Motor power vertical spindle right kW 7.5, Powerlock HSK 85
- Motor power vertical spindle left kW 7.5, Powerlock HSK 85
- Motor power upper horizontal spindle kW 7.5, quick-clamping device
- Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85
- Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85
- Motor power universal spindle kW 7.5, quick-clamping device
- Spindle speed rpm 6000/8300
- Spindle diameter mm 40
- Spindle receiving length vertical mm 220
- Spindle receiving length horizontal mm 250
- Axial adjustment range of the vertical spindles standard mm 75
- Axial adjustment range of the horizontal spindles standard mm 45 min. max.
- Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max.
- Sweeping circle diameter of the profiling spindles mm 100/200
- Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15
- Diameter of the spindle cylinders mm 120
- Diameter of the feed rollers mm 140
- Infeed table length mm 2500
- Adjustment range of the infeed table and infeed fence 10 mm
- Motor-driven feed roller in the outfeed table
- Manual central lubrication
- On/off switch for the feed unit before the surfacing cutter
- Horizontal pressure pads before the surfacing cutter with on/off switch
- Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter
- Pneumatic pressure shoes in front of the upper horizontal spindles
- Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel
- 2 feed rollers 140 x 25 per feed shaft
- Lighting inside the protective cover
- Extraction capacity min. 10,443 m3/h
- Including extraction hood!
- Including Powerlock mounting bracket
- All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included.
- Spare parts catalog: Complete, 8 PDF catalogs available

Note: Not all tools shown are part of this offer.
Note:
The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。