フォーマット丸鋸、価格はお問い合わせください。

Martin T77

New exhibition machine! General technical features: - Control system: 7.0" touchscreen ConnectTouch - Cutting height and cutting angle are electronically controlled, with digital input of cutting height and angle (controlled positioning of the motorized axes) as well as movement of the motorized axes in hold mode (movement of the axes via push button); Display resolution: 0.1 mm or 0.01°; Repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron; Table extension as standard across the full table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite construction, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm; Main saw blade ø 30 mm with auxiliary holes, Scoring saw blade ø 36 mm; Tool cutting width max. 20.0 mm for machines with single-sided tilt, 6 mm for machines with double-sided tilt; Saw blades up to 350 mm can be recessed under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool swivel: 0° to +47°, optionally -46° to +46°; Swivel is only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / Saw blade ø 450 mm; optionally: max. 205 mm / Saw blade ø 550 mm T7710/1: +45°: 106 mm / ø 450 mm; optionally 141 mm / ø 550 mm T7710/2: +45°: 104 mm / ø 450 mm; optionally 144 mm / ø 550 mm -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, optionally up to 11 kW; due to its design, the motor can be overloaded several times its rated power for a short time and therefore offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is pivotably mounted around its vertical axis. In addition, it can be swivelled to the right, so that even larger components can be easily processed - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stops; Measurement display via scale with magnifying glass; Cutting length 95 - 2000 mm, extendable up to 3220 mm - Crosscut table: Made of steel with powder coating, workpiece support in anodized aluminum, two sliding struts to extend the support surface; Length stop can be placed in the front and rear position without lifting; One-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating; Cast iron: Table surface finely milled; Aluminum: Aluminum components anodized - Protective cover / Extraction: Height-adjustable protective cover including interchangeable rear part for angular cuts; Protective cover for saw blades up to ø 450 mm (optional 550 mm); Extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; Total extraction connection Ø 140 mm; Minimum air volume: Vmin 18.5 m3/min at 20 m/s, underpressure 1,400 Pa - Electrical equipment: Connection
Itodpfxsz A Hh Us Amvol

この広告は自動翻訳されています。翻訳ミスがある可能性があります。