木工機械

Krüsi CMI 4 x 4 KW

Short-term availability – THE OPPORTUNITY!

We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale.

As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time.

Dismantling and collection by buyer
Assembly in consultation with Krüsi recommended
Machine year: 2018, in operation since 2019
Total length with tables approx. 35.5 m
Available from 08/2026

Machine details:

- 4 milling units, each 4 kW, spindle drive via toothed belt
- Maximum working range: 250 mm construction height and 245 mm wall thickness
- 6 frequency converters for soft start and motor braking
- Automatic work cycle and pneumatic workpiece clamping
- Siko position indicators on adjustment spindles for horizontal operation
- Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter
- Hand-operated drilling unit 1.8 kW, mounted on the right column
- Hydropneumatic feed for drilling unit
- Additional pneumatic vertical clamping cylinder with bracket
Hsdpfx Akey Ri Hujmenl
- Additional pneumatic horizontal clamping cylinder with bracket
- Auxiliary table for milling unit with additional vertical clamping cylinder
- Stop rail 0.5 m, mounted at the front left of the machine frame
- Stop rail 0.5 m, mounted at the front right of the machine frame
- Auxiliary table for short workpieces
- Steel chip funnel for pit extraction
- Dovetail and end-groove milling machine (with pneumatic rotary axis)

Milling and drilling tools:
For horizontal milling units:
- WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2
For vertical milling units:
- WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2
- WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2
For drilling unit:
- Drill Ø 20 mm, with long centering tip
- Drill Ø 30 mm, with long centering tip
For 90° swiveling dovetail and end-groove milling machine:
- WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm
- WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1
- WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2
- Clamping wrench for above dovetail cutters

Accessories:

Horizontal above:
- WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm
- Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2
- Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2

Horizontal below:
- WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3
- Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2

Vertical front:
- WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm
- Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2

Vertical rear:
- WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3
- Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2

- Safety guard for horizontal above with holder (for cutter Ø 270 mm)
- Safety guard for vertical rear with holder (for cutter Ø 180 mm)

この広告は自動翻訳されています。翻訳ミスがある可能性があります。