両面エッジバンディングマシン IMA Combima/II/390/B/L12（2010年製）

IMA Combima/II/390/B/L12

- Release agent application, top and bottom
- Scoring saw with 2.2 kW motor
- Trimming unit with 8.0 kW motor
- Double milling unit with 2 motors, each 4.5 kW
- Gluing unit
- End trimming unit
- Flush trimming unit
- Multi-function unit
- Multi-profile edge trimming unit
- Spray nozzles, top and bottom
- Flat edge trimming unit
- Buffing unit
- Grooving unit

Double-sided edge banding machine
Manufacturer: IMA
Type: Combima/II/390/B/L12
Year of manufacture: 2010
For longitudinal and transverse feed
- 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long,
rubber-coated chain plates, with cams
- Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm.

ICOS OPEN control system
- Max. feed width 3,300 mm
- Program-controlled master + slave width adjustment
- Fixed stop on the left in feed direction

Workpiece dimensions
- Min. feed width 244 mm (for longitudinal processing)
- Max. workpiece width (chain extension) 1,300 mm
- Min. workpiece thickness 8 mm
- Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying)

Edge material:
Todpfxjzuyqis Akbeb
- Min. height 14 mm, max. height 65 mm
- Roll material min. thickness 0.3 mm, max. thickness 3 mm

Strips and edgebanding:
- Min. thickness 0.8 mm, max. thickness 12 mm

Feed speed
- 10 - 50 m/min. with frequency-controlled drive.

Infeed device
- with 5 top-mounted, inclined and driven rollers.

Center support with roller track
- automatically lowerable and automatically centering.

Equipped on each side with:
Release agent application, top and bottom
Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled.
- Electronic positioning for stepless horizontal adjustment.
- Vertical adjustment manually with mechanical display.

Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM.
- Electronic positioning for stepless horizontal adjustment.

Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM.
- Electronic positioning for stepless horizontal adjustment.
- Vertical adjustment manually with mechanical display.

Gluing unit for hot melt adhesive
- With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm
- 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine)
- Horizontal roll holder

End trimming unit
- Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz
- Pneumatic swivel 0 + 25 for straight and miter cuts.
- Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min.

Flush trimming unit 08.0555
- With 2 motors 1,850 W, 200 Hz, 12,000 RPM.

Multi-function unit 08.353
- NC controlled with 2 motors, with automatic tooling for 4 profiles.

Multi-profile edge trimming unit
- with automatic tooling for 4 profiles via fixed-point control

Spray nozzles, top and bottom
- for applying cleaning agents

Flat edge trimming unit
Buffing unit
- With 2 motors, each 180 W, 50 Hz, 1400 RPM.

1 Grooving unit
- With 4.5 kW motor, 150 Hz, 9,000 RPM.
- Horizontal and vertical adjustment manually with mechanical digital display
- Pneumatic activation control
- Manual swivel 90

ICOS open
- PC-based control system with integrated PLC and electronic path control.
- User-friendly interface with Windows standards
- Simple, component-oriented

この広告は自動翻訳されています。翻訳ミスがある可能性があります。