エッジバンダーIMA
COMBIFORM K I R75 1035 V R3
基本データ
技術詳細
提供
- 所在地:
- Piemonte, イタリア
– 距離：約 9,749 km
- 利用可能性:
- オークション終了直後
- 納入条件:
- FCA
€3,500.00 (必須)
無料
説明
TECHNICAL DETAILS
Feed speed: max. 25 m/min
Edge thickness: max. 3 mm
Panel thickness: min. 14 mm
Panel thickness: max. 55 mm
Panel length: min. 350 mm
Number of panel sizing and milling units: 3
Panel sizing and milling unit 1
Motor power: 7.5 kW
Speed: 18,000 rpm
Panel sizing and milling unit 2
Motor power: 7.5 kW
Speed: 18,000 rpm
Panel sizing and milling unit 3
Motor power: 7.5 kW
Speed: 18,000 rpm
Number of edge-processing units: 3
End-trimming unit
Number of motors: 2
Motor power: 0.22 kW
Speed: 17,250 rpm
Fine milling unit for flush trimming and rounding
Motor power: 1.5 kW
Speed: 8,600 rpm
Buffing unit
Number of motors: 2
Motor power: 0.18 kW
Speed: 1,375 rpm
EQUIPMENT
Thin-edge processing
Thick-edge processing
EVA hot-melt adhesive system
Pressure system with rubber belts
Panel alignment system at the infeed
3 milling/roughing units with NC-controlled positioning
End-trimming unit
Fine milling unit for flush trimming and rounding with NC-controlled positioning
Buffing unit
Edge coil magazine with 2 positions
Glue pot for EVA hot-melt adhesive
Set of pressure rollers with 4 pressure rollers
NC-controlled positioning of the pressure rollers
Spraying unit
CE marking
The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installing, securing and operating the machine at the destination.
External reference: 3944
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
支払い処理
- 購入付帯費用:
- 18 %
- 支払条件:
- 前払い100％
- 支払い方法:
銀行振込
オファーの詳細
- 広告ID:
- A23304828
- リファレンス番号:
- AUC-2611348
- 更新:
- 最終更新日：10.11.2026
- 限定オファー:
- オークションでのみ入手可能
見学
Piemonte BRANDTKDF 350 C
Piemonte BIESSEROVER G 714
Piemonte HOMAGKAL 310/7/A20/S2
Piemonte DMCUNISAND K-I
Piemonte BIESSEAKRON 1330
Piemonte SELCOWNA 610 TWIN PUSHER
Piemonte STEFANIPERFORMANCE SB
Piemonte BRANDTKDF 660 GC
Piemonte PACKSIZEFM 6
Piemonte BIESSESKIPPER 130
Piemonte SELCOEBTR 120 TWIN PUSHER
Piemonte BIESSEROVER C 6.40
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker信頼の証
信頼のシールとは何ですか？
Machineseeker は、選ばれた販売店に Machineseeker 信頼シールを認定しています。 発行前に、経験豊富なMachineseekerのスタッフが標準化された包括的な検査を行います。
私たちは何を検査しますか？
営業許可証または商業登記簿抄本の確認
販売者の
郵送先住所の確認
銀行接続の検証
主番号の
電話による
接続可能性の確認
経済情報
には否定的な特徴が含まれていてはなりません
購入者からの苦情
は認証の剥奪につながる可能性がありますこれは購入者としてあなたにとって何を意味しますか？
Machineseekerの信頼シールにより、購入者として自身で確認しなくても、非常に高い確率で誠実かつ公正な取引をしている信頼できるディーラーを見分けることができます。
もちろん、購入プロセス中に意見の相違が生じることもあります。 Machineseekerは、Machineseeker上のアクティブな購入者または販売者による法令違反について責任を負いません。