CNCマシニングセンター

Holz-Her Dynestic 7535 10.5 Lift

Used machine

Year of manufacture: 2022

Condition: as new

Includes 6 months full warranty!

Only 70 operating hours; the machine has not yet been used in production!

Equipment and technical data:

BASE MACHINE

Holz-Her Processing Center DYNESTIC 7535 10.5 Lift

Processing length: 3100 mm

Machine frame: welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles. Gantry design.

Rack-and-pinion drive, helical gears in X and Y direction,
1 precision ball screw in Z direction for accurate positioning.

MATRIX TABLE
Fixed, continuous processing table with grid markings and through-slots in X and Y direction, slot spacing 50 mm. Includes 25 meters of sealing cord for fixing the sacrificial plate.

1 work zone with stop rails/stops - stop height 30 mm, pneumatically retractable. 2 stop rails in Y direction and 1 stop in X direction right (as seen from the front of machine).

Remote maintenance capability
Integrated network card for transfer of control and program data. Data transmission via high-speed internet connection. Requirement: High-speed internet connection at the machine.

USB port
For data backup and for directly importing processing programs at the control panel.

TECHNICAL DATA

Working dimensions 7535 10.5:
Max. nesting table surface:
X = 3100 mm, Y = 1560 mm

Max. travel paths:
X = 4695 mm, Y = 2305 mm, Z = 565 mm

Max. machining height 7535/7735 Classic without pusher:
Z = 300 mm from table top (excluding sacrificial plate)

Max. pusher clearance height above table for Push/Auto/Lift versions:
Z = 250 mm from table top (excluding sacrificial plate)

Maximum programmable speed
Vector speed: 128.0 m/min
X = 80 m/min, Y = 100 m/min, Z = 25 m/min

MACHINE OPERATION

SOFTWARE

CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim
1 software license secured via dongle for the machine
Tsdpfx Agjwxz Uyo Asf

CAMPUS V7 PLUS software for CNC processing centers:
Consisting of:
1. CAMPUS NC-HOPS
2. CAMPUS aCADemy
3. CAMPUS MT-Manager
4. CAMPUS Workcenter V7 PLUS
5. CAMPUS 3D material removal simulation BetterSim

CAMPUS NC-HOPS
Graphical variant system with conversational programming and CAD/CAM features for creating part variants using macro technology.

Hi-Speed USB-Device Network Server
Allows use of the CAMPUS single license on the machine or a PC in the same network. Only one license may be used in the network at a time!

Additionally:
CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim
1 software license secured via dongle for office or machine

CAMPUS V7 PLUS software for CNC processing centers:
Consisting of:
1. CAMPUS NC-HOPS
2. CAMPUS aCADemy
3. CAMPUS MT-Manager
4. CAMPUS Workcenter V7 PLUS
5. CAMPUS 3D material removal simulation BetterSim

CAMPUS NC-HOPS
Graphical variant system with conversational

この広告は自動翻訳されています。翻訳ミスがある可能性があります。