油圧プレス

HACO PHD 1600T

Hydraulic Tryout Press
Manufacturer: SCMB
The machine offered here is a hydraulic tryout press.
In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized.
Only components from leading European manufacturers were used in the refurbishment.
A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions.
The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required.

Technical Data
Manufacturer: MW/SCMB
Model: PHD1600 T
Press force (ram): 16,000 kN
Stroke (max.): 1,200 mm
Distance between ram and table: 2,350 mm
Ram plate (dimensions): 5,000 × 2,800 mm
Ram ejector force: 2,000 kN
Ejector stroke (max.): 150 mm
Ejector plate (dimensions): 3,700 × 1,300 mm
Main motor power: 3 × 110 kW at 1,500 rpm
Codpfx Agoyxhq Ijqjhc
Auxiliary motor power: n/a (1,500 rpm)
Sliding table (dimensions): 5,000 × 2,800 mm
Rapid approach speed: 300 mm/s
Working speed (50% nominal force): 34 mm/s
Working speed (100% nominal force): 17 mm/s
Return speed: 300 mm/s
Return force (gross): 1,660 kN
Lower cushion force: 4 × 1,000 kN
Lower cushion stroke (max.): 280 mm
Lower cushion dimensions: 3,920 × 1,680 mm

The above specifications are taken from the machine documentation.
The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive.

Tool making (Tryout / Spotting)

この広告は自動翻訳されています。翻訳ミスがある可能性があります。