CNC立旋盤

EMAG VLC 400

Technical details
max. workpiece diameter 400 mm
workpiece length - max. 300 mm
Control SIEMENS 840Dsl
swing diameter 520 mm
chucking diameter 500 mm
travel x / y / z 995/+,-30/580 mm
Additional information
Operating hours (total): 1848 hours

1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT
The Y-axis slide unit is mounted on the side of the machine base.
A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm.
BASE TURRET UNIT
Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy.
MAIN SPINDLE 37.7 KW

1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442)
With internal coolant supply to the tool.*
Max. speed 6,000 rpm
Crosscut speed 3,200 rpm
Torque at 100% duty cycle 54 Nm/18.1 kW
Torque at 40% duty cycle 83.6 Nm/28.0 kW
Torque at 10% duty cycle 100 Nm/33.5 kW

1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75
for BMT75 tool holders

1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE
Drag frame system for 10 workpieces
Max. workpiece height (including workpiece pallet) 300 mm
Max. workpiece weight 60 kg

1.2.7 SET (10 pieces) DRAG FRAME for O-type belt
For workpiece diameters 150 - 400 mm

1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP)

1.2.10 COOLANT SUPPLY 15 bar
Coolant pump flow rate approx. 80 l/min at 15 bar.
COOLING UNIT (6.5 kW, water-air)
A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW

1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE
Filter fineness 100 µm, with electrical and mechanical contamination indicator

1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING
Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l.

1.2.13 EMULSION MIST EXTRACTION
Extraction capacity approx. 800 m3/h

1.2.14 FLUSHING GUN

1.2.16 WORKPIECE MEASUREMENT
with a measuring probe that is completely protected from chips and coolant outside the work area.

1.2.17 BLOW-OFF PROBE

1.2.19 ENGRAVING SOFTWARE PACKAGE

Dedpfx Ajw Hxuajdhscn
1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT

1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE
(SIEMENS 840DSL, FANUC 31i/32i)

1.2.23 3-COLOR INDICATOR LIGHT

1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC

1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1)

1.3.4 TOOL SET FOR OP10 + OP20

1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough
The coolant is supplied to the workpiece through the main spindle and the clamping device.

1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change
n max. = 2200 rpm (Recommended speed according to DIN 6386)
- Set of hard base jaws
- Set of soft top jaws

1.3.11 Attachments for KNCS-N 500-155
Consisting of:
- Chuck flange DIN 55026 A11
- Drawbar adapter with through-hole and shut-off valve for central air or coolant supply
- Mounting screws

1.3.12 Irrigation nozzle in chuck bore

Additional tool holders with tools