H型 2500トン 単動油圧プレス

CRONOSSTECH CHP 2500

CRONOSSTECH CHP 2500
H-Type Hydraulic Press – 8-Guided Slides
General Description

The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and spinning applications that require extremely high tonnage. With its 8-guided H-frame construction, the press provides maximum rigidity during operation; parallelism and perpendicularity tolerances are reliably maintained throughout the full stroke length.

The CHP 2500 model, featuring large bolster dimensions, a multi-cylinder main pressing structure, and a high-capacity hydraulic system, is specifically designed for the automotive, heavy industry, defense, and high-tonnage tooling sectors. The frame structure is stress-relieved by vibration to ensure durability and reliable long-term operation.

⚙️ Standard Equipment

- Steel construction, 8-guided H-frame press body
- Stress-relieved frame via vibration method
- Bronze Zr14 slide bearings
- Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and production in accordance with CE standards
- PLC-controlled hydraulic system
- 7” touchscreen panel (DELTA)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- On-screen monitoring of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components

📐 Technical Specifications – CHP 2500

Type: Steel construction, 8-guided H-frame press body
Frame Material: St52 – ERDEMİR
Slide Bearing: Bronze Zr14
Capacity (Ram): 2500 tons
Moving Bolster Size: 1800 × 2600 mm
Fixed Bolster Size: 1800 × 2600 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 1000 mm
Kdodpjx N T S Ejfx Ahher
Min. Daylight: 200 mm
Max. Daylight: 1200 mm
Weld Stress Relief: Vibration method
Welding Certification: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017)
Max. Operating Pressure: 250 bar
Total Motor Power: 180 kW – IE3
Main Pump: 140 cm³ – REXROTH or PARKER
Moving Bolster Fast Descent Speed: 150 mm/s
Moving Bolster Drawing Speed: 12 mm/s
Moving Bolster Return Speed: 170 mm/s
Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units)
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 6,500 mm
Approx. Press Width: 3,950 mm
Approx. Press Depth: 2,600 mm
Lower Table Height from Floor: 1,500 mm
Primary Filling Valve: NG 200
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Displacement Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touchscreen Panel: DELTA 7”
Electrical Components: SIEMENS – SCHNEIDER
Approximate Weight: 120 tons

Production Note

This machine is manufactured by CRONOSSTECH in Turkey.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。