Autotherm 6回路温度調節装置 AWF 130-27/VK/6KAutotherm
Temperaturregelgerät AWF 130-27/VK/6K
Autotherm 6回路温度調節装置 AWF 130-27/VK/6K
Autotherm
Temperaturregelgerät AWF 130-27/VK/6K
固定価格 消費税別
€80,000
状態
中古
所在地
Borken 

基本データ
- メーカー:
- Autotherm
- 状態:
- 中古
価格と所在地
固定価格 消費税別
€80,000
- 所在地:
- Einsteinstraße 8a, 46325 Borken, Deutschland

電話する
オファーの詳細
- 広告ID:
- A22147572
- リファレンス番号:
- 23415
- 更新:
- 最終更新日:22.10.2026
説明
Autotherm
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
According to the enclosed technical brief:
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
Todpfx Aezd Rtyoh Esd
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
According to the enclosed technical brief:
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
Todpfx Aezd Rtyoh Esd
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
お問い合わせを送信
電話 & ファックス
+49 2861 ... 広告
あなたの掲載は正常に削除されました
エラーが発生しました

















